Hi Guys,

Have got a Xr6 Ba and the cruise control is playing up.
Its not your standard brake light or switch issue I don't think.
When it works the dash cruise indicator is on.
When it cuts out the dash cruise indicator does as well.

Any idea's

Cheers
Mark

I had this recently with my ba xr6t, cruise would work then go out and not come back on until I switched the ignition off and back on. turns out it was the switch slightly out of adjustment, I added a small bit of plastic hose to the end to make sure it was being depressed properly and no issues since, just in case your not sure the cruise switch is the green one. Hope this helps.

manual or auto ?

remove both switches reset by pulling center out then refit