Fordmods Logo

power mirrors on ba fairlane 

 

Page 1 of 1 [ 5 posts ] 

 
 Post subject: power mirrors on ba fairlane
Posted: Wed Jul 10, 2013 12:33 am 
Fordmods Newbie
Offline

Age: 35

Posts: 2

Joined: 17th Aug 2010

Ride: ba fairlane

Location: singleton
NSW, Australia

hi i own a 2005 ba fairlane ghia and my power mirrors dont work at all. cant seam to locate fuse, so i pulled all fuses and checked them as i dont have the user manual and the car workshop manual that i brought doesnt cover the power mirrors........... help
Top
 Profile  
 
 
 Post subject: Re: power mirrors on ba fairlane
Posted: Sat Jul 13, 2013 6:40 pm 
Technical Contributor
Offline

Posts: 556

Joined: 13th Jul 2013

Location: Campbelltown
NSW, Australia

mirror marked on fuse box in small writting
Attachment:
BA mirror - Ted.pdf
Top
 Profile  
 
 
 Post subject: Re: power mirrors on ba fairlane
Posted: Mon Jul 15, 2013 6:21 pm 
Fordmods Newbie
Offline

Age: 35

Posts: 2

Joined: 17th Aug 2010

Ride: ba fairlane

Location: singleton
NSW, Australia

looked on my fairlane and at the diagram but still unsuccessful can't find the small writing on the fuse box :( next option in auto electrics i think
Top
 Profile  
 
 
 Post subject: Re: power mirrors on ba fairlane
Posted: Tue Jul 16, 2013 6:17 pm 
Technical Contributor
Offline

Posts: 556

Joined: 13th Jul 2013

Location: Campbelltown
NSW, Australia

stop looking for a particular fuse - turn ignition to reds and test all fuses with a test light - power across both ends = good fuse
-some will be powered with ignition off - some may not be powered at all at this stage eg.tail light on with light switch.....

if vehicle is fully optioned with memory seat check seat memory operation key off
turn ignition on check if mirrors dip at all when vehicle put in reverse.

note.mirror switch on seat deactivates/activates mirror dip function if pushed and held for approximately 2 seconds or if quickly pushed will deactivate/activate for current drive cycle only....this is a seperate control of the mirrors instead of the mirror switch itself !

remove right door trim CAREFULLY ! disconnect mirror switch while holding trim up or mirror switch can be broken when wiring pulls on switch - dont pull switch out while trim still fitted can damage mount - with ignition on reds check with test light for +ve power at violet with red trace and earth on black wire at plug for mirror switch - if you have power and earth suggest new switch (unusual for both mirrors to fail at same time )

if no power /earth at mirror switch -with ignition on reds
behind door trim attached to mirror switch is a control module part of memory seat system - on some models this can be disconnected and the plug connected directly to the mirror switch for testing - if not possible check input side not switch side of module wiring for power and earth if power and earth suggest new mirror memory module........
Top
 Profile  
 
 
 Post subject: Re: power mirrors on ba fairlane
Posted: Tue Jul 16, 2013 6:19 pm 
Technical Contributor
Offline

Posts: 556

Joined: 13th Jul 2013

Location: Campbelltown
NSW, Australia

have you resolved the problem
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 5 posts ] 

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu Apr 25, 2024 10:34 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names