Fordmods Logo

anyone have any wolf 3d maps theyd like share 

 

Page 2 of 2 [ 29 posts ] Go to page Previous  1, 2

 
Posted: Tue Jan 15, 2008 10:50 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 2637

Joined: 5th Nov 2004

Ride: EL TURBO GHIA

Power: 372 rwkw

Location: penrith
NSW, Australia

i think there like $2500 or so ,i could be wrong tho

ems8860 i dont think he need to mod dizzy

 

_________________

HMMMM BOOST !!!


ED fairmont R.I.P

STREET FORDS FEATURE CAR ISSUE 42

Top
 Profile  
 
 
Posted: Tue Jan 15, 2008 10:53 pm 
Getting Side Ways
Offline
User avatar

Age: 29

Posts: 975

Joined: 26th Nov 2004

Ride: el falcon

Power: 608 rwkw

Location: Waroona
WA, Australia

not sure what they sell for now, i think the are around 2300 - 2500.

 

_________________

# 1997 EL Falcon GLI - 600+rwkw

# 2008 FPV FG GTE - Xa Coilovers, 20x8/ 20x10 Fairladys

Top
 Profile  
 
 
Posted: Tue Jan 15, 2008 11:02 pm 
Smokin em up
Offline

Age: 30

Posts: 236

Joined: 2nd Jun 2005

Location: melbourn
VIC, Australia

also the XTC ems does not need the dizzy modifyed.....

 

_________________

4LTR-JET: 9.1 @150mph!!

Top
 Profile  
 
 
Posted: Tue Jan 15, 2008 11:18 pm 
Getting Side Ways
Offline
User avatar

Age: 31

Posts: 411

Joined: 21st Aug 2006

Ride: EL XR6, Blueprint, Turbo

Location: Melbourne
VIC, Australia

so whats my options for an ecu, without having to modify the dissy or anything else like that.

i was thinking using the haltech interceptor, do i only need to control fuel because i have the dissy?

 

_________________

Image
http://www.myspace.com/luke_xr
230rwkw - 10psi

Top
 Profile  
 
 
Posted: Wed Jan 16, 2008 7:40 am 
Getting Side Ways
Offline

Age: 32

Posts: 1112

Joined: 18th Jan 2005

Location: MAFFRA
VIC, Australia

thanks for the map

 

_________________

97 el xr6,5 speed short shifter,sequential scoop,no arial,freshly resprayed,low on 17's,3 inch zorst,stainless hi flo cat,snort stage 3 stainless manifold,garrett t04e,front mount cooler,wolf 3d ecu,seimens 760cc injectors,walbro fuel pump

Top
 Profile  
 
 
Posted: Wed Jan 23, 2008 6:18 pm 
Oompa Loompa
Offline

Posts: 28

Joined: 24th May 2007

Location: Mildura
VIC, Australia

el_xr6_luke wrote:
so whats my options for an ecu, without having to modify the dissy or anything else like that.

i was thinking using the haltech interceptor, do i only need to control fuel because i have the dissy?


If your going to the trouble of installing an aftermarket ECU you may as well control timing as well as fuel to get the most out of your engine. As stated before EMS needs no dizzy mods. Costs between $1000 -$1600 for ECU depending on the model you choose.

If your only going to run 6 psi and use standard injectors buy a rising rate fuel reg and keep the standard ECU
Top
 Profile  
 
 
Posted: Wed Jan 23, 2008 6:28 pm 
Getting Side Ways
Offline
User avatar

Age: 31

Posts: 411

Joined: 21st Aug 2006

Ride: EL XR6, Blueprint, Turbo

Location: Melbourne
VIC, Australia

wheres the best place to buy an EMS from?
can you do an ebay search for me to see if theres any on there i could use.
and what models should i be looking at.

im not sure about how to go about the rising rate reg option. i dont really want a dodgy job of it, but id be prepared to do it while i save for the ecu, whats involved with the rising rate reg?

 

_________________

Image
http://www.myspace.com/luke_xr
230rwkw - 10psi

Top
 Profile  
 
 
Posted: Wed Jan 23, 2008 10:43 pm 
Oompa Loompa
Offline

Posts: 28

Joined: 24th May 2007

Location: Mildura
VIC, Australia

Rising rate is not a big job and is a cheap option until you save money for aftermarket ecu and larger injectors. I ran mine that way for a couple of weeks until I saved money for EMS. Engine ran pretty good I had it on a dyno just to check A/F rations under full noise and it was running fat as, low 11"s. Car made 178 rwkw on 6 psi of boost so I was happy with the result. I now have my EMS fitted and working on my tune well over 200 now. You can contact EMS directly either by email or Ph.

All you need to do is connect rising rate into fuel line then run a fuel line to the fuel rail. Connect a vacum line to manifold

Web site is www.enginemanagementsystem.com ask for Peter and tell him what you planning and he will direct you to the right product. Then find a good tuner who knows the product. If your in Sydney Rigoli is the man to talk to. Once again Peter can give you advise on tuners close to you.

good luck with what ever you decide, you will love it
Top
 Profile  
 
 
Posted: Wed Jan 23, 2008 11:00 pm 
Getting Side Ways
Offline
User avatar

Age: 31

Posts: 411

Joined: 21st Aug 2006

Ride: EL XR6, Blueprint, Turbo

Location: Melbourne
VIC, Australia

im in victoria, what rising rate fuel reg did u have? did u take any photos that i could look at to install it.

should i go a Vortech 12:1 fuel reg? what type will i need.
the wastegate spring is 7.5psi

 

_________________

Image
http://www.myspace.com/luke_xr
230rwkw - 10psi

Top
 Profile  
 
 
Posted: Wed Jan 23, 2008 11:08 pm 
Oompa Loompa
Offline

Posts: 28

Joined: 24th May 2007

Location: Mildura
VIC, Australia

I used a Sard on mine. Turbosmart also make them plenty of other brands as well. Depends once again on your budget. There should be some engine tuners on this forum that could advise you as well. Just give them a PM
Top
 Profile  
 
 
Posted: Wed Jan 23, 2008 11:19 pm 
Getting Side Ways
Offline
User avatar

Age: 31

Posts: 411

Joined: 21st Aug 2006

Ride: EL XR6, Blueprint, Turbo

Location: Melbourne
VIC, Australia

what ratio did u use?

 

_________________

Image
http://www.myspace.com/luke_xr
230rwkw - 10psi

Top
 Profile  
 
 
Posted: Fri Jan 25, 2008 7:45 pm 
Oompa Loompa
Offline

Posts: 28

Joined: 24th May 2007

Location: Mildura
VIC, Australia

:oops: can't say what ratio it came with the kit and is controlled by manifold pressure. Certainly works ok, having trouble tryin to pull fuel out of the map during wot runs but where geting close know
Top
 Profile  
 
 
Posted: Fri Jan 25, 2008 8:22 pm 
Getting Side Ways
Offline
User avatar

Age: 29

Posts: 975

Joined: 26th Nov 2004

Ride: el falcon

Power: 608 rwkw

Location: Waroona
WA, Australia

all sard regs are 1.7:1 ratio

 

_________________

# 1997 EL Falcon GLI - 600+rwkw

# 2008 FPV FG GTE - Xa Coilovers, 20x8/ 20x10 Fairladys

Top
 Profile  
 
 
Posted: Thu Mar 13, 2008 7:55 am 
Smokin em up
Offline

Age: 54

Posts: 218

Joined: 12th Jun 2005

Location: hobart
TAS, Australia

im chasing 6cyl maps just for a look also, dont know but could we start a download list somewhere

 

_________________

NC2 Fairlane AU2 Intech 4.0 Wolf V500 ECU Accel 500cc Injectors Eaton M90 Blower MPx Porting 75mm Mustang TB Intercooler Holley 255lph EL XR6 Rear End 3.45 LSD Duel Fuel lots more.
Long and Very Nice

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 2 of 2  [ 29 posts ]  Go to page Previous  1, 2

Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Dec 17, 2017 5:53 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names