Fordmods Logo

BA-BF-SX-SY - Scantool Fun 

 

Page 32 of 45 [ 666 posts ] Go to page Previous  1 ... 29, 30, 31, 32, 33, 34, 35 ... 45  Next

 
 Post subject: Re: BA-BF-SX-SY - Scantool Fun
Posted: Sun Oct 24, 2010 12:30 am 
ACT Cruise Moderator
Offline
User avatar

Age: 42

Posts: 6249

Joined: 24th Nov 2004

Ride: '06 BF GT-P

Power: 293 rwkw

Location: Canberra
ACT, Australia

fordsme wrote:
data_mine wrote:
Straight into the trans.

Point me to a circuit diagram?

All ZF 6HP26s I ever met don't do that. They're CAN.

And the flappy paddles... wired straight in as well?


Image
Image

As for my paddles, I tap into the wires as they come out of the shifter module.

 

_________________

1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow
2006 BF GT-P in Ego, mods. Supercharged 5.8L all alloy modular

Top
 Profile  
 
 
 Post subject: Re: BA-BF-SX-SY - Scantool Fun
Posted: Sun Oct 24, 2010 1:05 am 
Fordmods Newbie
Offline

Posts: 19

Joined: 13th Jul 2010

Ride: lincoln ls

Location: new york
Oustide Australia

data_mine wrote:
As for my paddles, I tap into the wires as they come out of the shifter module.

Thanks for the excerpts. They don't show much so is the rest online or downloadable somewhere please?
Top
 Profile  
 
 
 Post subject: Re: BA-BF-SX-SY - Scantool Fun
Posted: Sun Oct 24, 2010 2:02 am 
ACT Cruise Moderator
Offline
User avatar

Age: 42

Posts: 6249

Joined: 24th Nov 2004

Ride: '06 BF GT-P

Power: 293 rwkw

Location: Canberra
ACT, Australia

No they're not available online (try opening the pics in a new window FordMods insist on downsizing them so they're unreadable).

But those diagrams cover everything going to the ZF.
The CAN signal goes off to the PCM.

 

_________________

1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow
2006 BF GT-P in Ego, mods. Supercharged 5.8L all alloy modular

Top
 Profile  
 
 
 Post subject: Re: BA-BF-SX-SY - Scantool Fun
Posted: Sun Oct 24, 2010 3:22 am 
Fordmods Newbie
Offline

Posts: 19

Joined: 13th Jul 2010

Ride: lincoln ls

Location: new york
Oustide Australia

data_mine wrote:
No they're not available online (try opening the pics in a new window FordMods insist on downsizing them so they're unreadable).

But those diagrams cover everything going to the ZF.
The CAN signal goes off to the PCM.

Did that immediately, thanks, and can read the pics fine - good size & resolution - just kinda tantalising as they hint at more.

Any idea what the OBD module address is for that block described as "AT6 TRANSMISSION" across the K-Line (ISO9141-2)?

Do you have a Module Communications diagram or Module Network diagram or the like, showing all the diagnostics networks (buses)? It may be in several parts (for CAN, for ISO, for PWM if any, etc, and should show the DLC - the OBD connector).

The EEC-A A02 PNS is as shown on BFpins_a.jpg on AFF I reckon. Sound right?

I'll have a hunt round the other diagrams on AFFwhen I get a chance. I don't think this will be on TIS, or is it?
Top
 Profile  
 
 
 Post subject: Re: BA-BF-SX-SY - Scantool Fun
Posted: Sun Oct 24, 2010 12:56 pm 
ACT Cruise Moderator
Offline
User avatar

Age: 42

Posts: 6249

Joined: 24th Nov 2004

Ride: '06 BF GT-P

Power: 293 rwkw

Location: Canberra
ACT, Australia

fordsme wrote:
Any idea what the OBD module address is for that block described as "AT6 TRANSMISSION" across the K-Line (ISO9141-2)?

Do you have a Module Communications diagram or Module Network diagram or the like, showing all the diagnostics networks (buses)? It may be in several parts (for CAN, for ISO, for PWM if any, etc, and should show the DLC - the OBD connector).

The EEC-A A02 PNS is as shown on BFpins_a.jpg on AFF I reckon. Sound right?

I'll have a hunt round the other diagrams on AFFwhen I get a chance. I don't think this will be on TIS, or is it?


Luke indicates the TCM is 7E1, I haven't verified, but he's usually right on these things. I haven't done it yet, but I assume setting up a 'RT E1' command will give me all the broadcasts sent by the TCM.

Module Comms Network, shows CAN and ISO (that's all we have AFIAK)
Image

Yes, that is the PNS signal direct from the PCM (EEC-A connector).

 

_________________

1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow
2006 BF GT-P in Ego, mods. Supercharged 5.8L all alloy modular

Top
 Profile  
 
 
 Post subject: Re: BA-BF-SX-SY - Scantool Fun
Posted: Mon Oct 25, 2010 1:11 am 
Fordmods Newbie
Offline

Posts: 19

Joined: 13th Jul 2010

Ride: lincoln ls

Location: new york
Oustide Australia

data_mine wrote:
Luke indicates the TCM is 7E1, I haven't verified, but he's usually right on these things. I haven't done it yet, but I assume setting up a 'RT E1' command will give me all the broadcasts sent by the TCM.

Module Comms Network, shows CAN and ISO (that's all we have AFIAK)

Hey, thanks!
It'll be 7E1 on CAN but it can only be a 2-hex char addr on ISO. (It's unlikely to bear any relationship to the 7e1.)

Oh dear! That's a terrible diagram. I can read it fine, but it's very short on detail!!

I suspect C-174 is the DLC. And 70C may be the ISO K-line on pin 7.
Top
 Profile  
 
 
 Post subject: Re: BA-BF-SX-SY - Scantool Fun
Posted: Mon Oct 25, 2010 6:47 pm 
ACT Cruise Moderator
Offline
User avatar

Age: 42

Posts: 6249

Joined: 24th Nov 2004

Ride: '06 BF GT-P

Power: 293 rwkw

Location: Canberra
ACT, Australia

fordsme wrote:
I suspect C-174 is the DLC. And 70C may be the ISO K-line on pin 7.


Yep and Yep.

 

_________________

1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow
2006 BF GT-P in Ego, mods. Supercharged 5.8L all alloy modular

Top
 Profile  
 
 
 Post subject: Re: BA-BF-SX-SY - Scantool Fun
Posted: Wed Oct 27, 2010 1:50 am 
Fordmods Newbie
Offline

Posts: 19

Joined: 13th Jul 2010

Ride: lincoln ls

Location: new york
Oustide Australia

fordsme wrote:
I suspect C-174 is the DLC. And 70C may be the ISO K-line on pin 7.

data_mine wrote:
Yep and Yep.

I love the way that Module Comms diagram is wrong!!

At least they left off that ISO diag line to the trans module. It's clearly shown on C-14.

Is M-GATE what they call the manual shifter for the ZF (I think you have such a thing but am not sure)?

And is C-14 on the side (or top or bottom) of the actual ZF case? Know of any pics?
Top
 Profile  
 
 
 Post subject: Re: BA-BF-SX-SY - Scantool Fun
Posted: Wed Oct 27, 2010 10:10 am 
ACT Cruise Moderator
Offline
User avatar

Age: 42

Posts: 6249

Joined: 24th Nov 2004

Ride: '06 BF GT-P

Power: 293 rwkw

Location: Canberra
ACT, Australia

fordsme wrote:
fordsme wrote:
I suspect C-174 is the DLC. And 70C may be the ISO K-line on pin 7.

data_mine wrote:
Yep and Yep.

I love the way that Module Comms diagram is wrong!!

At least they left off that ISO diag line to the trans module. It's clearly shown on C-14.

Is M-GATE what they call the manual shifter for the ZF (I think you have such a thing but am not sure)?

And is C-14 on the side (or top or bottom) of the actual ZF case? Know of any pics?


The diagrams is what we've got to deal with. :roll:

M-GATE goes low when the shifter is moved 'over to the left' to enable 'performance mode' (Dperf - if you leave it alone), or manual mode (push it forward or back, which sends low TIP- and TIP+ respectively). The box ignores TIP- and TIP+ if M-GATE isn't low. Which for me is handy, because while the shifter can't be accidentally moved when it's not over to the left, my paddles can be, the box happily ignores them if the shifter is in D or any other position.

C14 is on the box, it's a round mutlipin plug (kind of like a DIN style but bigger). Don't have a picture handy now (at work).

 

_________________

1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow
2006 BF GT-P in Ego, mods. Supercharged 5.8L all alloy modular

Top
 Profile  
 
 
 Post subject: Re: BA-BF-SX-SY - Scantool Fun
Posted: Wed Oct 27, 2010 8:09 pm 
Fordmods Newbie
Offline

Posts: 19

Joined: 13th Jul 2010

Ride: lincoln ls

Location: new york
Oustide Australia

data_mine wrote:
M-GATE goes low when the shifter is moved 'over to the left' to enable 'performance mode' (Dperf - if you leave it alone), or manual mode (push it forward or back, which sends low TIP- and TIP+ respectively). The box ignores TIP- and TIP+ if M-GATE isn't low. Which for me is handy, because while the shifter can't be accidentally moved when it's not over to the left, my paddles can be, the box happily ignores them if the shifter is in D or any other position.

C14 is on the box, it's a round mutlipin plug (kind of like a DIN style but bigger). Don't have a picture handy now (at work).

Thanks! I'd be grateful for pics of that connector. The ZF in your car is a very interesting variant of the ones I've met before.
Top
 Profile  
 
 
 Post subject: Re: BA-BF-SX-SY - Scantool Fun
Posted: Wed Oct 27, 2010 8:53 pm 
ACT Cruise Moderator
Offline
User avatar

Age: 42

Posts: 6249

Joined: 24th Nov 2004

Ride: '06 BF GT-P

Power: 293 rwkw

Location: Canberra
ACT, Australia

Image

Not an actual pic, but the connector layout. The circuit numbers will match up the the diagrams previously posted.

 

_________________

1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow
2006 BF GT-P in Ego, mods. Supercharged 5.8L all alloy modular

Top
 Profile  
 
 
 Post subject: Re: BA-BF-SX-SY - Scantool Fun
Posted: Thu Oct 28, 2010 4:51 am 
Fordmods Newbie
Offline

Posts: 19

Joined: 13th Jul 2010

Ride: lincoln ls

Location: new york
Oustide Australia

data_mine wrote:
Image

Not an actual pic, but the connector layout. The circuit numbers will match up the the diagrams previously posted.

Brilliant! Thank you.
Looks very like the one I have but the diagram for mine doesn't list some of those pins at all.
Now to hunt for more data on the actual network messages on the Falcons...
Top
 Profile  
 
 
 Post subject: Re: BA-BF-SX-SY - Scantool Fun
Posted: Thu Oct 28, 2010 10:53 am 
ACT Cruise Moderator
Offline
User avatar

Age: 42

Posts: 6249

Joined: 24th Nov 2004

Ride: '06 BF GT-P

Power: 293 rwkw

Location: Canberra
ACT, Australia

fordsme wrote:
data_mine wrote:
Image

Not an actual pic, but the connector layout. The circuit numbers will match up the the diagrams previously posted.

Brilliant! Thank you.
Looks very like the one I have but the diagram for mine doesn't list some of those pins at all.
Now to hunt for more data on the actual network messages on the Falcons...


I've found some doco that shows ZF make two electronics (TCM) modules, one (M spec - the one we have) has three extra wires, for control of the shifting, the other (E spec) relies on CAN messages to do so, and is missing those three wires.

 

_________________

1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow
2006 BF GT-P in Ego, mods. Supercharged 5.8L all alloy modular

Top
 Profile  
 
 
 Post subject: Re: BA-BF-SX-SY - Scantool Fun
Posted: Thu Oct 28, 2010 5:57 pm 
Fordmods Newbie
Offline

Posts: 19

Joined: 13th Jul 2010

Ride: lincoln ls

Location: new york
Oustide Australia

data_mine wrote:
I've found some doco that shows ZF make two electronics (TCM) modules, one (M spec - the one we have) has three extra wires, for control of the shifting, the other (E spec) relies on CAN messages to do so, and is missing those three wires.

Oh :(
Is that somewhere I can see it please?

BTW, page 3 of http://www.thectsc.com/images/pdf/6_spe ... cement.pdf
shows the connector whose pic you posted - thanks for helping me find it.

You may like more of the doc on http://www.thectsc.com/index.php?p=page ... =tech_info

When you mention "M spec" and "E spec" are these the same as the M-shift and E-shift in http://www.thectsc.com/images/pdf/thect ... cement.pdf ?
Top
 Profile  
 
 
 Post subject: Re: BA-BF-SX-SY - Scantool Fun
Posted: Thu Oct 28, 2010 9:55 pm 
ACT Cruise Moderator
Offline
User avatar

Age: 42

Posts: 6249

Joined: 24th Nov 2004

Ride: '06 BF GT-P

Power: 293 rwkw

Location: Canberra
ACT, Australia

fordsme wrote:
data_mine wrote:
I've found some doco that shows ZF make two electronics (TCM) modules, one (M spec - the one we have) has three extra wires, for control of the shifting, the other (E spec) relies on CAN messages to do so, and is missing those three wires.

Oh :(
Is that somewhere I can see it please?

BTW, page 3 of http://www.thectsc.com/images/pdf/6_spe ... cement.pdf
shows the connector whose pic you posted - thanks for helping me find it.

You may like more of the doc on http://www.thectsc.com/index.php?p=page ... =tech_info

When you mention "M spec" and "E spec" are these the same as the M-shift and E-shift in http://www.thectsc.com/images/pdf/thect ... cement.pdf ?


Page 12/13
http://www.scribd.com/doc/24267127/Audi ... 6%E2%80%9D

yeah, replace spec with shift. I remembered incorrectly.

 

_________________

1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow
2006 BF GT-P in Ego, mods. Supercharged 5.8L all alloy modular

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 32 of 45  [ 666 posts ]  Go to page Previous  1 ... 29, 30, 31, 32, 33, 34, 35 ... 45  Next

Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Mar 29, 2024 6:22 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names