Fordmods Logo

fuel pump 


Page 1 of 1 [ 2 posts ] 

 Post subject: fuel pump
Posted: Wed Dec 16, 2009 10:57 pm 
Parts Gopher

Posts: 66

Joined: 8th Nov 2009

Ride: BA falcon

Location: central coast
NSW, Australia

hi guys, the fuel pump in my car died on my way home from work today and i had to get it towd home, i had a bit of a look at it wen i got it home to see if i could change it my self, do any of u guys no how to change it. like how do u get the clamp off of it aswell as the plastic ring over the top of it
 Post subject: Re: fuel pump
Posted: Wed Dec 16, 2009 11:02 pm 
Getting Side Ways

Age: 30

Posts: 638

Joined: 16th Feb 2005

Ride: EA Turbo

Location: Melbourne
VIC, Australia

The clamp is a kunt of a think, depending where it's located I usually use a short screw driver or a 8mm socket on a uni joint, once thats off I use a wide flatblade screw driver and a hammer to get the cap off, just don't break the tabs, try keeping the flat blade at the bottom of the tabs and bang it with the hammer and it should come loose, the rest is easy, the whole assembly will come out, undo the clamp holding the pump in, unplug the wires, and hose, jam new one on and reverse previous steps.



1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi

Display posts from previous:
Sort by  
 Page 1 of 1  [ 2 posts ] 

Who is online

Users browsing this forum: No registered users and 15 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum



It is currently Mon May 28, 2018 9:03 pm All times are UTC + 11 hours



(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names