|
| hi_reach |
|
||
|
hi all
noticed oil splatter on bonnet last night pcv valve was not in manifold stuck my finger down there the rubber grommet has gone so off to ford they dont have on there computer diagram they were clutching a straws does anybody have any idea of a part number or size or where i can get one its a ef xr8 fl its right at the back of the block just below the firewall and it t-peices into the inlet chamber thanks marty
_________________ how can i run a v8 with petrol so high?
|
||
| Top | |
||
| TerroristGHIA |
|
|||
|
Mine did this, I cut a larger piece of hose and "gooped" it into place. Then the original hose goes into the new gooped hose.
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| hi_reach |
|
||
|
can you remember the gouped hose size
dont have any lying araound so have to buy one
_________________ how can i run a v8 with petrol so high?
|
||
| Top | |
||
| TerroristGHIA |
|
|||
|
Take the original into an auto parts shop, and then get them to measure it againts other lengths of hose. It needs to be a firm fit inside the new hose, which is then gooped into the hole in the manifold. Or go to a wreckers and see if the have any 5.0 efi motors. The valve you are after is the same on all injected Windsors, and as you have noticed, it just pulls free from the motor
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| 1 bad ef |
|
||
|
better spares in newcastle at mayfield have them in stock
_________________ ON THE EIGHTH DAY GOD CREATED HOLDENS TO KEEP THE d***head OUT OF FORDS |
||
| Top | |
||
| veeate |
|
|||
|
i got one from ford back in april.....unfortunatley i cant find that particular receipt......i even got the gauze that sits under it from them too......ill see if i can get the part number tomoro...
|
|||
| Top | |
|||
| kato |
|
||
|
Any decent parts shop should have them , the company that makes them is called fuelmiser.
_________________ EF XR8 5spd: 302ci /178rwkw |
||
| Top | |
||
| veeate |
|
|||
|
kato wrote: Any decent parts shop should have them , the company that makes them is called fuelmiser.
fuelmiser make the PCV valve,yes... not the rubber grommet it sits on - genuine part only.... |
|||
| Top | |
|||
| kato |
|
||
|
Try part no: PCG-08
_________________ EF XR8 5spd: 302ci /178rwkw |
||
| Top | |
||
| Leroy |
|
||
|
it is listed in the ford parts catalogue, maybe your local dealer was having a bad day and didnt really want to spend the time on it.
took me about 2 minutes so was pretty hard to find..... F7CZ 6A892 AA
_________________ Now driving a Hilux |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 14 guests |
