|
| AdamN |
|
||
|
I was resetting the ECU. I disconnected the negative terminal for a couple of hours. When I connected it again, I discovered the car has an alarm. I don't have the button to turn it off either. The previous owner never gave it to me. Is it safe to just cut all the wires to the siren? I need to be able to use my car today
Please help |
||
| Top | |
||
| smoke_ |
|
|||
|
i wouldn't cut the wires to the siren, as then it will still not start.
you need to work out what they've cut, or bypassed. i ripped a whole system out, but still had to reconnect a couple of wires that were cut and joined.
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| AdamN |
|
||
|
I called the RAC. He cut a couple wires near the ignition. Then one near the siren. Then removed one plug from a relay. and fixed hehehe
Good thing is.. I can reattach the cables when I get the spare remote off the previous owner 
|
||
| Top | |
||
| smoke_ |
|
|||
|
gee that was quick
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| AdamN |
|
||
|
Yeah once they got here only took us 15mins. I think he was more paranoid about showing me how to bypass it. I was trying to reassure him it was only for this car, not to steal others hahaha
|
||
| Top | |
||
| Timmeh |
|
||
|
And does you car no longer stall when steering after resetting the ECU?
|
||
| Top | |
||
| AdamN |
|
||
|
I'll post that info tomorrow morning. Going for a drive to warm her up and then doing the re-learn procedure.
|
||
| Top | |
||
| Happy |
|
|||
|
I can cut out alarm systems - but seeing as you have already got the RAC man to do it I guess you don't need my services.... Wahhhh
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
| Top | |
|||
| smoke_ |
|
|||
|
off topic a bit here, but i've never had to install an alarm to an ef/el (smartlock), but i want to put one in my ef.
is there anything besides the usual i should know?
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| Timmeh |
|
||
|
Happy wrote: I can cut out alarm systems - but seeing as you have already got the RAC man to do it I guess you don't need my services.... Wahhhh
His sidecutter skills are the best bar none. Your knew name Happy could be "CHOPPER" |
||
| Top | |
||
| Happy |
|
|||
|
smoke_rubber wrote: off topic a bit here, but i've never had to install an alarm to an ef/el (smartlock), but i want to put one in my ef.
is there anything besides the usual i should know? not sure what the usual is ... can you buy off the shelf alarms and self install - ones that are reasonably decent?? or do they need to be done proffessionally ?
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
| Top | |
|||
| smoke_ |
|
|||
|
i am an auto-elec, but don't work on a great deal of cars. i can get hold of some alarm systems, and if i can't, a mate can.
just thought the smartlock circuit might play a part, but if not, all is good.
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| Happy |
|
|||
|
you do need to hook into the smartlock - how I dunno.
Back on topic - how did your drive go AdamN ?
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
| Top | |
|||
| Gaz |
|
||
|
happy just stares down the alarm system and its starts falling apart there and then hes just that incredible.
_________________ 2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows |
||
| Top | |
||
| AdamN |
|
||
|
ahhhhhh went for a drive.. did the relearning procedure. Drive's much better, but the revs still drop when braking hard. Cleaning the ISC tomorrow. Back to the other thread for probs on that though.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |
