hey peeps just been looking into gwtting some head work done, camaccross thisand may be considering it..

just after som feedback on what u guys think..


The Stage 3 utilises a large valve for increased air flow in the higher valve lift. We can maintain the same port speed as in the stage 2. The air flow numbers are greater by 10-15 CFM on the 300-500 thou of valve lift. These heads will handle 550 net valve lift. SuperFlow flowbench report supplied.


PART NUMBER - SPH3LV
PRICE - $1386 V8, $975, 6 CYL, $693 4 CYL* Ask About CNC porting


FEATURES
New O.E. valves.
High flowing valve seats.
New valve locks.
Radius leading edge on exhaust valve.
Threads re-tapped.
Exhaust valves are backcut.
Head gasket faces re-machined.
Intake valves are backcut.
Full set of K Line guides.
Blending the valve seat to the bowl.
Bowl machine work.
Large Valves.
New 4140 valve retainers.
New valve stem seals.
Valve tips equalized.
Spring pressure checked.
Combustion chambers relieved.
All spring heights are re-corrected.
New set of chrome silicon valve springs.
Valve heights equalized.
Hot tanked.
Sand Blasted.
Vacuum tested.
Clean, assemble and pass quality testing.

OPTIONAL EXTRAS

Top gasket set - V8:$210, 6 Cyl:$187.
One piece stainless valves - V8:$562, 6 Cyl:$462.
Roller Rockers - V8:$693, 6 Cyl:$660.
Standard rockers - V8:$150, 6 Cyl:$95.
LPG conversion kit - V8:$528, 6 Cyl:$447.
3Additional port work - V8:$750, 6 Cyl:$700.
Chrome taller rocker covers - V8:$105 6 Cyl:$95.



Will produce 265hp & 279 ft.lbs of torque at the flywheel


for $975 what u recon

cam is xtra $550

Sounds like Kostecki Engine Centre

it surely does.

for the money i'd go the CNC head they do

Last edited by tickford_6 on Wed Jun 21, 2006 10:00 pm, edited 1 time in total.

For your money i would go the CNC head too!! I asked for a quote!

The cnc head is available in port 2 version and they are come complete, the price are $2800.00 for the street strip version and the full competition is $3200.00 this head has different valve sizes and will need a increase of compression please do not hesitate to call me in regards to your combination

whoa big money

sure is guys


heheh

yeh been looking into it all. good thing another site i help handel has discounts with em.



best thing is they do courses to ..and i live 2 mins down the road

when i called them the cnc job was $1400
don't know where you got 3000 from

lol same price they told me tickford_6

wonder ing what ecu would i need to run with it aswell would the std bottom end hold up alright ??
nother thing is injecters????

that comes down the cam you use.