|
| chewie_86 |
|
|||
|
Could anyone tell me the part numbers for the BF XR6T and F6 air intake snorkle.
If anyone knows where they can be found apart from a Ford dealer i'd appreciate it. |
|||
| Top | |
|||
| EL__Fairmont |
|
|||
|
chewie_86 wrote: Could anyone tell me the part numbers for the BF XR6T and F6 air intake snorkle. If anyone knows where they can be found apart from a Ford dealer i'd appreciate it. EBAY..............
_________________ 97 EL Fairmont 4l OHC .Silver. |
|||
| Top | |
|||
| chewie_86 |
|
|||
|
Well that was my first thought but since I dont know what the part numbers are I want to know before I go paying someone for something which mightn't fit.
|
|||
| Top | |
|||
| krisisdog |
|
|||
|
$40 at Ford, you wont get it any cheaper elsewhere.
|
|||
| Top | |
|||
| chewie_86 |
|
|||
|
Found these on another forum. Thought i'd post them here if anyone can confirm them or for future reference.
Typhoon air tube (i'm assuming they mean the snorkle behind the headlight not above the radiator) BAF9C676B ~$66 Typhoon bottom tray (So you dont have to cut the airbox) BAF9A600A ~$122 Haven't found a part number for the typhoon main snorkle but when I do i'll post it up. |
|||
| Top | |
|||
| inverno10 |
|
||
|
FTG - site sponsor
$175 if i remember right for the lower part of airbox with the hole and the second intake. |
||
| Top | |
||
| KWIKXR |
|
|||
|
The xr6t snorkel you should be able to get from ford, the ones on ebay seems to be a bit more than what ford would charge as some people have found.
For the F6 intake duct for the lower part of the airbox you could always make one up thats bigger than the F6 one. FordFreak made a pretty good setup out of an EA flex tube and it worked to the same affect for a fraction of the price. All you need to do is cut a hole in the bottom of the airbox and slot it in |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 91 guests |
