|
| feza |
|
|||
|
i have scored a mint au 4 litre head which i am porting and polishing,reseating the standard valves and using the standard springs and retainers,i am going to be using an ef xr6 cam,hopefully i will get some gains but i was just wondering if anyoneknows if it is a straight bolt on thing,im thinkin of gettin the head shaved 10 or 20 thou aswell and will be using an au head gasket,any help appreciated
_________________ No Holdens in this Garage Mate |
|||
| Top | |
|||
| Molloy |
|
|||
|
Yeah should go straight on, ur going to use the XR6 rockers with that cam arnt ya?
_________________ SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat. |
|||
| Top | |
|||
| feza |
|
|||
|
dont actually have the rocker gear at all,only the head and valves,still waitin for the cam,are the rockers different for xrs,i thought that the xr series only had slightly stiffer springs?im usin standar au springs,will it valve bounce easier with standar rockers?
_________________ No Holdens in this Garage Mate |
|||
| Top | |
|||
| Molloy |
|
|||
|
If ur gonna use the EF cam u will need the EF rockers also as AU rockers are different ratio. springs shouldnt bounce XR cam is nothing major. But im not sure if EF springs and AU springs are the same.
_________________ SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat. Last edited by Molloy on Wed Jun 13, 2007 9:38 pm, edited 1 time in total. |
|||
| Top | |
|||
| revcore |
|
|||
|
Did the XR's have double valve springs?
_________________
|
|||
| Top | |
|||
| feza |
|
|||
|
cool bananas,ill hunt down the e series rockers for it,they bolt on same hey?i know ea 3.9s had double springs,the au ones seem very soft,hope it dont matter with the xr cam
_________________ No Holdens in this Garage Mate |
|||
| Top | |
|||
| Molloy |
|
|||
|
Yeah they bolt in the same, You might wanna ask around about the springs, should just get some Crane springs and whack in save u doing it later if you get a bigger cam.
_________________ SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat. |
|||
| Top | |
|||
| feza |
|
|||
|
i got the head for free which had one slightly bent valve so im replacing that and i got the cam for free so i gotta spend some cash on rockers and a valve,dont really wanna spend too much money on it,im an apprentice mechanic and this is my first time actually porting and modifying a head
_________________ No Holdens in this Garage Mate |
|||
| Top | |
|||
| Molloy |
|
|||
|
Too easy mate, get stuck in good fun 2 be had.
_________________ SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 42 guests |
