|
| fastleno |
|
|||
|
Took the batt out to charge it cos it was flat it was winding over but not enough to fire, put it back in charged it wouldn't crank so I jumped on and searched the forums found plenty of info but now I am a little confused, is it immobilised if when the key is in the on position the jewel on the dash is solid or does it flash rapidly ? Mine stays solid does that mean the key and bem have code issues?
|
|||
| Top | |
|||
| Shen Long |
|
|||
Age: 49 Posts: 391 Joined: 22nd Aug 2008 Ride: 2002 AUII Fairlane Sportsman V8 Location: Roxby Downs |
Leave the key in the ACC position for 1 hour & see if it cranks then...
Also just incase make sure the auto is in N or P. Sometimes slapping the BEM will also help it get unstuck - dont ask me why |
|||
| Top | |
|||
| TimmyA |
|
|||
|
This is not right for AU-II as they run smartshield security not the earlier smartlock...
Can't help you with the jewel behaviour... If you have two keys coded to the vehicle than you add others... Have you tried your second key? If you don't have the master key then it's a troublesome task... If you only have the master key then Ford can add other keys easy... Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| Shen Long |
|
|||
Age: 49 Posts: 391 Joined: 22nd Aug 2008 Ride: 2002 AUII Fairlane Sportsman V8 Location: Roxby Downs |
TimmyA wrote: This is not right for AU-II as they run smartshield security not the earlier smartlock.... What's the difference between the two? |
|||
| Top | |
|||
| TimmyA |
|
|||
|
Worlds of difference...
Smartlock was from eb-2 to au-1 and smartshield was from au-2 to bf I think... Smartlock was the barrel was coded to the Smartlock module. Smartshield was the key was coded to the BEM Smartshield cars were sold with a master and slave key. The master was essential for the easy addition of keys. There is just sequence of events that bring it into learning mode. If you don't already have two keys Ford is required to plug into your car, get a series of out codes and upload them to Ford, Ford sends in codes back... You have a couple of mins to add the keys... Smartlock was dumb. Any key that turns the barrel will start they car. Nay, any object that turns the barrel will start the car... To program the barrel the the car. You leave the key on for half an hour. If a criminal has been barrel and key and half an hour its real easy. Hence most of us have other kill switches... Remotes all program the same right through... Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| fastleno |
|
|||
|
its immobilised the jewel in the cluster is ment to go off once everything checks out, i have been over all fuses ect everything else is working,
i only have the one key not sure if its master but it is a genuine ford key. so what do i do now ? |
|||
| Top | |
|||
| TimmyA |
|
|||
|
Two keys are ideal... I'd get a second cut and get Ford to program both the the car again...
Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| fastleno |
|
|||
|
so it has to be towed it to ford ? sounds like and expensive exercise
|
|||
| Top | |
|||
| Shen Long |
|
|||
Age: 49 Posts: 391 Joined: 22nd Aug 2008 Ride: 2002 AUII Fairlane Sportsman V8 Location: Roxby Downs |
Cant you just leave the key in for 30mins & then crank it?
|
|||
| Top | |
|||
| TimmyA |
|
|||
|
Leave the key in it for 30 mins to satisfy old mate... Once it's immobilised there isn't many options mate... No one but Ford can get into an au-2 or onward... It's gonna need diagnosis... See if the road side assist will do it as one of your included tows?
This is why I own an ed... Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| fastleno |
|
|||
|
^^^^ ha ha ol mate is persistent but its smartshied, leave the ignition on thing only works for smartlock series one au's and its 61 minutes the ebii up to el are 30minutes and just for the record I did try it cos the Haynes manual does say to do that but its pre 6/1999 IIRC
Last edited by fastleno on Sun Dec 02, 2012 8:57 pm, edited 1 time in total. |
|||
| Top | |
|||
| fastleno |
|
|||
|
No roadside assist, the car is unregisted and I am trying to sell it a guy who was real keen came to look over it when this all happened, he is still keen but doesn't want to buy a car that's immobilized
|
|||
| Top | |
|||
| Shen Long |
|
|||
Age: 49 Posts: 391 Joined: 22nd Aug 2008 Ride: 2002 AUII Fairlane Sportsman V8 Location: Roxby Downs |
a little off topic but related, what will happen if i change my door barrel & ignition barrel from a different Ford AU S2 & if i still have the original key from the donor car.
Will it work? |
|||
| Top | |
|||
| TimmyA |
|
|||
|
Owning an ed I don't know that much about smartshield... Not sure...
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| fastleno |
|
|||
|
Change the Bcm and ecu aswell and it will
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 91 guests |
