|
| charlie4401 |
|
||
|
Hi guys I need to know if my motor has standard springs or if the guy I bought it off of is right and as ACL springs.... is there any way to tell be looking at them??? and can any one tell me what the Yellow paint is for on the head Studs???? is that the sandard marking or aftermarket??
     
|
||
| Top | |
||
| Papa Smurf |
|
||
|
charlie4401 wrote: Hi guys I need to know if my motor has standard springs or if the guy I bought it off of is right and as ACL springs.... is there any way to tell be looking at them??? and can any one tell me what the Yellow paint is for on the head Studs???? is that the sandard marking or aftermarket?? As to the springs, if it is indeed a motor from a BA up to the 9/2005 they are standard 6cyl springs, after that date, they added upgraded springs for the Turbo ONLY, I will take a look at them today and let you know any further info I can find. As to the yellow marking, this head may have been worked on in it's warranty period and the mechanic may have done that for his benefit? I have not seen one before with those markings. I will get back to you ok? 
|
||
| Top | |
||
| Steady ED |
|
|||
|
paint on headbolts looks like marking for angle when they were torqued up.
you can see another dab on the head itself as well. NFI on valve springs, i don't know if ACL even sell valve springs?
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| charlie4401 |
|
||
|
ok that would be good. the motor had only done 50,000Ks then it was rebuilt but never put in a car after that.
|
||
| Top | |
||
| Papa Smurf |
|
||
|
Ok, I found out what you need to know. The springs are the standard springs and for Turbo up to 09/2005, the Later Turbo springs have a greyish paint on top. Sorry about the crappy pic of the standard spring but I juggled the phone when I took it
Standard spring: Attachment: Standard_Spring.jpg 10/2005 onwards Turbo Spring: Attachment: Turbo_Spring.jpg
|
||
| Top | |
||
| charlie4401 |
|
||
|
thanks heaps but do the standard spring have a iner spring like a dubble spring??? or like a helper.
|
||
| Top | |
||
| Papa Smurf |
|
||
|
The springs are as you see them, single no inner helper, the V8 springs are inner and outer.
|
||
| Top | |
||
| charlie4401 |
|
||
|
I'm in VIC at the moment but i'm sure the ones in my motor have iner springs i'll have a look when I get home. dose any one know were i can get some good Valve springs from???
|
||
| Top | |
||
| cjh |
|
|||
|
charlie4401 wrote: I'm in VIC at the moment but i'm sure the ones in my motor have iner springs i'll have a look when I get home. dose any one know were i can get some good Valve springs from??? I think Crow do them now.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 33 guests |
