|
| EDXR6-Poly |
|
|||
|
How do you change the P/S pully from V belt to Serp as my V belt one off my ED was new yet my S/H EF pump has started to leak and make horrible groaning noises even with plenty of oil....
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| cjh |
|
|||
|
You need a special tool to do it.....I have one, also use it for doing water pumps too.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| EDXR6-Poly |
|
|||
|
any chance you could let me know how in a PM etc?
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| cjh |
|
|||||||
|
Here is what it looks like. The tool is used to remove & refit pulleys, for Ford, Chrysler & Chev.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||||||
| Top | |
|||||||
| phongus |
|
|||
|
you can buy one off ebay for 110 bucks...
http://cgi.ebay.com.au/ABW-ALTERNATOR-P ... 483aeeb8c3 It is a good tool to have when you consider the cost of removing and putting a new pulley on. I got quoted from Ford to just remove my power steering pulley at the handsome price of $80. They had to charge minimum hour rate or something and on top of that, they will charge me another $80 to put another one on...part not supplied.
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| fowlerj |
|
||
|
Sorry to hijack,
But is this the only way to remove pulleys? s**t.... I've killed my pulley/bearing on the power steering pump because I had the belt too tight for a few months (didn't realise) and only now have backed it off because it was starting to whine. Now it rattles on idle and on full lock squeals as well. BTW am I right in thinking only the pulley/bearing/or whatever would be busted? I've found a new pump+pulley on eBay for $160. Or the tool for $110 posted and then new pulley/bearing ($?) Sorry again to hijack!
_________________ 1997 EL Falcon XR6 Sedan |
||
| Top | |
||
| freexrider |
|
||
|
the ford mob in gatton changed mine for 75 bucks.. it only took them about a half hour to do it too
_________________
|
||
| Top | |
||
| phongus |
|
|||
|
fowlerj wrote: Sorry to hijack, But is this the only way to remove pulleys? s**t.... I've killed my pulley/bearing on the power steering pump because I had the belt too tight for a few months (didn't realise) and only now have backed it off because it was starting to whine. Now it rattles on idle and on full lock squeals as well. BTW am I right in thinking only the pulley/bearing/or whatever would be busted? I've found a new pump+pulley on eBay for $160. Or the tool for $110 posted and then new pulley/bearing ($?) Sorry again to hijack! I think you may have damaged the shaft seal. Vanes might be damaged internally causing the whine, but that is just a wild guess.
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 56 guests |
