just want to get some info, i'm going to put a chip and cam in, just wondering whats the best combo to go for, i was looking at a mild cam but not sure what chip to get. Another question, if i'm going to turbocharge it later on, is it worth getting this done?.
Cheers Acidic

check out the stickies at the top of the pages. Also check out the ECU section. stock_standard has done a MSII install and there is a thread about that in the ECU section. Also you may want to check what people have said about cams.

If you want just a mild cam you can get this as mild as the RPD R1's for around $140 2nd hand. The R3 is good medium performance.

It all depends on how lumpy you want the cam to be. Just do a search and see what people have said about everything.

cheers matey

is that stage 2 cam a regrind or a cam made to those specs, iv heard good and bad things concerning regrinds, want one for my EF. also do you notice much difference on the launch, 60ft times i mean. i have to beat my brother in his turbo 318i, that does low 14's on 1/4 mle.

if you're going to cam and chip then call SURECAM, they do a matched cam and chip package.

otherwise it's all just gamble