|
| metasaiah |
|
|||
|
Just wondering if there are different fuel pumps for 4.0 vs. 5.0; also if later model stuff (AU-FG) is better and if it is interchangeable with stock E-series 4.0 stuff.
_________________ EF2 Fairmont Ghia. AU2 engine running EF gear. Intake, exhaust, injection etc; 8" rear stockies with 265/50R15 rubber. Shiftkitted auto, J3, custom grille and dash cluster and lots of other useless crap... |
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
Time to have a look at the Goss Products catalog, or the Fuel Miser catalog & see what they say.
IIRC EA to ED, the 4.0 & 5.0 fuel pumps are the same. Probably the same in EF & EL too. With the AU, the 220kw v8 might have had a bigger pump. You might have to modify your fuel pump holder to fit anything other than a stock for your setup pump. Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| TROYMAN |
|
||
|
ea to early el i6 and v8 use the same pump, but late el/au to fg has a different style pump carrier, im not sure if the pump itself can be mounted into the e series..
the pump flow is pretty much the same between them all, its just the different fuel regs that give different pressures |
||
| Top | |
||
| metasaiah |
|
|||
|
I see that a lot of guys running forced induction have upgraded to aftermarket pumps; at what stage do you need to consider upgrading?
_________________ EF2 Fairmont Ghia. AU2 engine running EF gear. Intake, exhaust, injection etc; 8" rear stockies with 265/50R15 rubber. Shiftkitted auto, J3, custom grille and dash cluster and lots of other useless crap... |
|||
| Top | |
|||
| TROYMAN |
|
||
|
metasaiah wrote: I see that a lot of guys running forced induction have upgraded to aftermarket pumps; at what stage do you need to consider upgrading? the std pump can supply enough fuel for up to aprox 160-180rwkw n/a set up... you can fit a walbro 255 high flow pump to a std n/a set up if you want but its not necessary.. |
||
| Top | |
||
| metasaiah |
|
|||
|
Thanks Troyman
_________________ EF2 Fairmont Ghia. AU2 engine running EF gear. Intake, exhaust, injection etc; 8" rear stockies with 265/50R15 rubber. Shiftkitted auto, J3, custom grille and dash cluster and lots of other useless crap... |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 58 guests |
