G'day focks had a problem with the xh ran like a pig so i have changed the injectors that made it run heaps better until it started to miss again so i have now changed the plugs still ran rough,so i started it ran on 4 cyl as i pulled to plug wires off and made no diff, so ok that the problem the leads so i bought new leads and what a pain in the a*** job that is to change when changing i found that the cap was only help by one clip instead of the two so i was thinking this was the problem all along, took a while but got both clips on then staed to find still running on 4 now wondering if i have the leads on wrong can anyone send a drawing of the dizzy with the numbers as to where the leads go,1-5-3-6-4-2 on the cap thanks Gordon, lindsayland@aussiebroadband.com.au or dragcar@skymesh.com.au

the firing order on the dizzy cap is, 1-5-3-6-2-4... NOT 1-5-3-6-4-2

thanks for that ,ill double check that also if it has a slight head gasket leack that would make is miss aswell yeah ? but will start with the leads to make shore r right thanks again