|
| eb_guy888 |
|
||
|
Hey guys, well ive finally got around to getting ef on dyno. Im booked in for 3pm. I wanted this for 2 reasons:
1) I want a stock reading before I mod next couple of weeks to show that a) I did all the work and b) to show what gains u get from certain things 2) Hopefully this dyno will backup the fact of head shaving as the only thing thats been done to this car is the head has been shaved. Many questions have been asked about gains by doing this, and this was done to my eb and didnt feel any gain at all, so with matching up a stock figure and mine, and account for the age of the engine, hopefully it will prove that there is no gains by shaving the head. Of a*** tho this could blow up in my face as some cars have shown much higher readings stock then they really should so have 2 see So check back after 3pm for results... the stock power for an ef falcon should be around 98-105rwkw can anyone correct me? cause im not completely sure but yeh, see yas after 3 |
||
| Top | |
||
| andrewts |
|
|||
|
I would expect at least 115 from an EF?
|
|||
| Top | |
|||
| Molloy |
|
|||
|
I say mmmmm 105rwkw
_________________ SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat. |
|||
| Top | |
|||
| efbignik |
|
|||
|
106
_________________ EFBIGNIK 145.9 RWKW Falcon / 16.27 @ 86.72mph (Stock)
|
|||
| Top | |
|||
| RuchEa |
|
||
|
Results?
_________________ EB XR6 project almost complete!
|
||
| Top | |
||
| eb_guy888 |
|
||
|
well dyno complete
135.6 rwhp which is approx 101.1 rwkw for all those who still argue over k&n filters or no filters giving gains, he took the airbox off so and flipped her so there was no filter and I ran a 139.1rwhp so there is a gain there with a decent air induction. Im gettin exhaust next week and headers week after and he told me to drop a decent filter in and bring it back and he will do it again for next to nothing to get another power run b4 the almight cam goes in 
He said it did run nice tho and more power compared to some of the ef's and el's he has put through stock and thinks with just the exhaust and headers it will do 150hp maybe more so stay tuned in next few weeks http://video.google.com.au/videoplay?do ... 5586499210 dyno charts will be posted later Dyno Chat: he spelt me name wrong dammit and for some reason put it down as an xr6 but anyways here it is 
Last edited by eb_guy888 on Fri Oct 06, 2006 6:33 pm, edited 2 times in total. |
||
| Top | |
||
| kezz |
|
||
|
drop in a manual and rspec3. hello mid 140's
_________________ Kezz's 5sp Box Car ---> RPD enhanced with a bunch of other stuff |
||
| Top | |
||
| TheRealPyro |
|
||
|
i would love to do a dyno but i am too poor:P!
|
||
| Top | |
||
| efbignik |
|
|||
|
nar just a r3
good set of headers and good zorst autos will do it i got 145.9rwkw
_________________ EFBIGNIK 145.9 RWKW Falcon / 16.27 @ 86.72mph (Stock)
|
|||
| Top | |
|||
| kezz |
|
||
|
didnt you get some head work done too nick?
_________________ Kezz's 5sp Box Car ---> RPD enhanced with a bunch of other stuff |
||
| Top | |
||
| efbignik |
|
|||
|
oh yeah but that was a head reco $400
and simple port work that cost $90 more thats not ganna give me f**k all more really i don't think wait till i port match my intake to head then it will b hell-the-f**k-o 150's here i come
_________________ EFBIGNIK 145.9 RWKW Falcon / 16.27 @ 86.72mph (Stock)
|
|||
| Top | |
|||
| kezz |
|
||
|
sounds good. manual is more fun though hahaha!
_________________ Kezz's 5sp Box Car ---> RPD enhanced with a bunch of other stuff |
||
| Top | |
||
| efbignik |
|
|||
|
nar stalled auto
kicks a** off the line when the tyers do not spin
_________________ EFBIGNIK 145.9 RWKW Falcon / 16.27 @ 86.72mph (Stock)
|
|||
| Top | |
|||
| kezz |
|
||
|
efbignik wrote: nar stalled auto
kicks a** off the line when the tyers do not spin your saying that cause you cant drive stick!
_________________ Kezz's 5sp Box Car ---> RPD enhanced with a bunch of other stuff |
||
| Top | |
||
| eb_guy888 |
|
||
|
haha
results post updated |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 71 guests |
