|
| gate_21 |
|
||
|
So the eb's been running rough on idle. I checked the map sensor to find that the other end of the vacuum hose wasn't connected to anything. Anyone know where this connects to?
Cheers |
||
| Top | |
||
| eb xr6 falcon |
|
||
|
it goes to the bottem of the inlet manifold next to that air flow sensor.
|
||
| Top | |
||
| 93EB |
|
|||
Age: 46 Posts: 2484 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
It connects to the throttle body.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| EBMontTom |
|
||
|
If you imagine sticking your arm through the gap at the front of the manifold to try to get to the dizzy, if you were to reach past the dizzy, the connection for the map sensor will be on the inside of the manifold there right near the coil.
Im sure someones got photos.
_________________ EL XR6 Manual |
||
| Top | |
||
| BenJ |
|
||
|
Jack up the car, slide under the front on your back so you can see up under the inlet manifold.
Then about half way along the plenum box on the manifold, there is a plug (air temp sensor) and above that is a small metal vacuum pipe. The Map Sensor Vacuum hose goes on there. Cheers BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| gate_21 |
|
||
|
Thanks to all for their help. I found it, just can't quite get a hand in there to reconnect it. Doesn't help that there is an LPG converter in the way.
|
||
| Top | |
||
| eb xr6 falcon |
|
||
|
Havent seen any of these on lpg i didnt know they put em there its hard enough tryin to get to stuff there let alone with a gas converter
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 18 guests |
