|
| Felony |
|
|||
|
I have just bought a eb block with au crank, rods and pistons, on the top of the pistons there are lil grooves for the valves but they are small, im wondering if they are from valves hitting the piston or did the au pistons needed lil grooves to go into a eb block? i was told this is fine to use as is..... any help would be appreciated,
thanks
_________________ Succesful trades with bentles_eb, Pane, chunkz, xr8_dismantler, OBS35N, mrnasty, Steady ED, voxace, Mash85, ovo616, ef biff, lukey, dazza2924, Seannyb, gunit18, jkk, Tocchi, |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
they are valve reliefs
a factory casting they are meant to be like that
_________________ RIP SCOTT |
|||
| Top | |
|||
| EFFalcon |
|
|||
|
my EF pistons have the grooves.
i'd be inclined to say all of the 3.9/4.0 pistons have them.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| bogan393 |
|
|||
|
yep the ebii i wrecked had them aswell
_________________ Rides:
|
|||
| Top | |
|||
| arm79 |
|
|||
|
I'm just curious how you can get an EB block with an AU crank, considering they are largely a different design... Biggers mains, etc.
|
|||
| Top | |
|||
| Felony |
|
|||
|
arm79 wrote: I'm just curious how you can get an EB block with an AU crank, considering they are largely a different design... Biggers mains, etc.
this is the advertisement for the motor http://www.fordforums.com.au/showthread.php?t=24701 it states rod crank and pistons into a eb block, thanks
_________________ Succesful trades with bentles_eb, Pane, chunkz, xr8_dismantler, OBS35N, mrnasty, Steady ED, voxace, Mash85, ovo616, ef biff, lukey, dazza2924, Seannyb, gunit18, jkk, Tocchi, |
|||
| Top | |
|||
| arm79 |
|
|||
|
Felony wrote: arm79 wrote: I'm just curious how you can get an EB block with an AU crank, considering they are largely a different design... Biggers mains, etc. this is the advertisement for the motor http://www.fordforums.com.au/showthread.php?t=24701 it states rod crank and pistons into a eb block, thanks Advertisment or not... I didn't think it could be done. What is the part number stamped on the crank? |
|||
| Top | |
|||
| Felony |
|
|||
|
I will let you know when i pull it apart this weekend,
thanks
_________________ Succesful trades with bentles_eb, Pane, chunkz, xr8_dismantler, OBS35N, mrnasty, Steady ED, voxace, Mash85, ovo616, ef biff, lukey, dazza2924, Seannyb, gunit18, jkk, Tocchi, |
|||
| Top | |
|||
| bogan393 |
|
|||
|
It is possibly to fit the au crank rods and pistons into a older block aslong as you use all the rods crank and pistons, not just rods, or crank or pistons etc. It has been done a few times with good results. I saw that motor forsale and if i still had my ea i woulda snapped it up also, very good buy.
_________________ Rides:
|
|||
| Top | |
|||
| Felony |
|
|||
|
lol i only paid 110 and he brought it to me!!!!
 gotta love that.... this is going to be the motor i have wanted to put in one of my ea's for some time now, it will be mated to a t5 and lsd, it will be n/a with some nos to boot, should be good fun, will start a thread when i get right into it,
thanks guys
_________________ Succesful trades with bentles_eb, Pane, chunkz, xr8_dismantler, OBS35N, mrnasty, Steady ED, voxace, Mash85, ovo616, ef biff, lukey, dazza2924, Seannyb, gunit18, jkk, Tocchi, |
|||
| Top | |
|||
| bogan393 |
|
|||
|
Mate thats a unreal buy and even better sounding project. Yea i was heavily consdering doing the same thing to my ea as a cheap short time fixed for the rooted motor that was in it. But instead i just flogged it off and got a ef. Anyway deffinately keep us posted how it all goes.
_________________ Rides:
|
|||
| Top | |
|||
| Felony |
|
|||
|
Its a eb crank with au rods and pistons in a eb block.....
cheers
_________________ Succesful trades with bentles_eb, Pane, chunkz, xr8_dismantler, OBS35N, mrnasty, Steady ED, voxace, Mash85, ovo616, ef biff, lukey, dazza2924, Seannyb, gunit18, jkk, Tocchi, |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 71 guests |
