|
| Campbell18 |
|
|||
|
hey guys
i know this topic has probably been covered a hundred times over, but im reletively new to the site and couldnt find the information i was after I have recently purchased a XH snorkel and was wondering if anyone has pics or information regarding a boxed pod filter on an ED falcon? can it be done with the obvious size constraints of the stock airbox? cheers
_________________ ED 4.0L auto... pacemaker PH4480, Aus Pac Catback exhaust, wade 1636 with j3 tune =130rwkw |
|||
| Top | |
|||
| KRUPTD |
|
||
|
Yes it can be done,but with mine i had a bigger style K/N pod filter i dont have much left of the airbox,but what is left does a very good job of keeping the heat away and also there is a noteicable difference in power on the cooler days where the air temp is cooler and more dense.
Here are some pics of my ED,hope if can give you some idea's.Let me tell you thought once i customized the air box and fitted my pod filter the ED did seem to go better.I also made up a new intake tube which is 3inch with 2 silicone joiners.      
_________________ COMING SOON,XD WITH A TURBO...CLEVO STYLE |
||
| Top | |
||
| peaandham |
|
|||
|
Very nice work have you though of getting a larger mouth on that Snokel? Or getting a hole in the bottom of the box and route some tubing so near the wheel well for extra air?
_________________ OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing ! |
|||
| Top | |
|||
| KRUPTD |
|
||
|
No,dont really want anything bigger.Those XH snorkles are a joke for what prices people want for them.
Well if you have a look behind the LHF headlight assembly there is heaps of gaps for air to flow through,so there is no need on cutting holes in gaurds or making big scoops.Mine does the job fine and for the cost is great.On the cooler days you really notice the difference in the get up and go... Remember you have to make the engine work,it will only suck in so much air it wants.Mines not a high HP machine i just fitted this up because i was chasing for some more performance and it worked out good.
_________________ COMING SOON,XD WITH A TURBO...CLEVO STYLE |
||
| Top | |
||
| Campbell18 |
|
|||
|
cheers for the pics KRUPTD
looks like a pretty decent layout Can a find a K&N filter in a smaller size?? Reason being im soon to be a P plater and dont want to chop up the air box to much would rather keep that stock look ( apart from the intake tube)
_________________ ED 4.0L auto... pacemaker PH4480, Aus Pac Catback exhaust, wade 1636 with j3 tune =130rwkw |
|||
| Top | |
|||
| KRUPTD |
|
||
|
The only reason i used this filter is because i didnt want to go out and spend too much,i had it stored since i had it on a couple of my previous cars.
If you want performance with the standard look i would advise doing the BBM conversion.The EF/EL intake setup and then you can run the better pod tyle setup in the air box. Either way with the ED airbox you will not be able to reuse it with the original air fliter due to the design of the inatke to air box part. K/N make a huge variety of sizes of air filters.
_________________ COMING SOON,XD WITH A TURBO...CLEVO STYLE |
||
| Top | |
||
| madeaspack |
|
||
|
have a k&n pod in an ed airbox,without the box being cut for sale.
i can post pics if you like
_________________ 97 el xr6,5 speed short shifter,sequential scoop,no arial,freshly resprayed,low on 17's,3 inch zorst,stainless hi flo cat,snort stage 3 stainless manifold,garrett t04e,front mount cooler,wolf 3d ecu,seimens 760cc injectors,walbro fuel pump |
||
| Top | |
||
| peaandham |
|
|||
|
Yes please i would like to see it !
_________________ OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing ! |
|||
| Top | |
|||
| low_ryda |
|
|||
|
i think alot of people would like to see it. would be some nice pipework
_________________ Not to get technical, but according to chemistry alcohol is a solution. |
|||
| Top | |
|||
| KRUPTD |
|
||
|
Yes,i would love to see it aswell.Its pretty much impossiblenot too cut the bottom of the air box on the ED's.But like i said i would like to see.
_________________ COMING SOON,XD WITH A TURBO...CLEVO STYLE |
||
| Top | |
||
| jonathon |
|
|||
|
yes i would also like to see it s i need to box my pod filter but dont wanna cut the air box up
_________________ Owning 1 of 84,847 ebII. |
|||
| Top | |
|||
| Campbell18 |
|
|||
|
sounds pretty sweet mate
pics would be greatly appreciated
_________________ ED 4.0L auto... pacemaker PH4480, Aus Pac Catback exhaust, wade 1636 with j3 tune =130rwkw |
|||
| Top | |
|||
| eb xr6 falcon |
|
||
|
if i do something like that in mine i would need to go back to standerd for a rwc wont i.?
|
||
| Top | |
||
| KRUPTD |
|
||
|
obviously you would have to make it the way it left the factory for a RWC.The only reason i cut the box was to make my pod filter fit.It's no big for me i have a spare box.The main reason i kept the box was also to be used as a box to shield the engine heat.
_________________ COMING SOON,XD WITH A TURBO...CLEVO STYLE |
||
| Top | |
||
| madeaspack |
|
||
|
PICS...
  
_________________ 97 el xr6,5 speed short shifter,sequential scoop,no arial,freshly resprayed,low on 17's,3 inch zorst,stainless hi flo cat,snort stage 3 stainless manifold,garrett t04e,front mount cooler,wolf 3d ecu,seimens 760cc injectors,walbro fuel pump |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 39 guests |
