Fordmods Logo

EF/EL XR6 engine?? 

 

Page 1 of 1 [ 9 posts ] 

 
 Post subject: EF/EL XR6 engine??
Posted: Thu Apr 20, 2006 7:36 pm 
Getting Side Ways
Offline

Posts: 436

Joined: 20th Jun 2005

Gallery: 1 images

Ride: Gli

Location: melbourne
VIC, Australia

hey guys, just a quick one how can i recognise an XR6 motor except the obvious red rocker cover and then T engraved onto the front of the head, possibly numbers on the block or build plate any help is much appreciated cheers in advance
Top
 Profile  
 
 
Posted: Thu Apr 20, 2006 7:53 pm 
Stock as a Rock
Offline

Age: 35

Posts: 117

Joined: 29th Oct 2005

Ride: EB S XR6

Location: Western Sydney
NSW, Australia

engine wise, thats it. Unless there is some one else knows another way.

 

_________________

EB S XR6
161kw At The Wheels
14.8 @ 149.92 km\h WSID

Top
 Profile  
 
 
Posted: Thu Apr 20, 2006 8:07 pm 
ACT Cruise Moderator
Offline
User avatar

Age: 36

Posts: 6275

Joined: 24th Nov 2004

Ride: '06 BF GT-P

Power: 293 rwkw

Location: Canberra
ACT, Australia

If it's and XR, or a EF2/EL Ghia then it'll have one.

But yeah, the 'T' stamp on the head is the best way (everythign else can be faked easily).
edit: Oh, the head part number will start 94DT or 96DT. Non tickford will be 94DA or 96DA.

 

_________________

1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow - 97.5rwkw
2006 BF GT-P in Ego, mods. 293rwkw - 12.427@109 - 0-1000m 24.838@221

Top
 Profile  
 
 
Posted: Fri Apr 21, 2006 1:26 pm 
Fordmods Junkie
Offline
User avatar

Age: 38

Posts: 5051

Joined: 5th Nov 2004

Ride: Kia Rio - 1.4L Auto

Power: 238 rwkw

Location: Westside
VIC, Australia

data_mine wrote:
If it's and XR, or a EF2/EL Ghia then it'll have one.

But yeah, the 'T' stamp on the head is the best way (everythign else can be faked easily).
edit: Oh, the head part number will start 94DT or 96DT. Non tickford will be 94DA or 96DA.


And don't forget about head part number 95DT for a ticky head.

Non Tickford also includes 95DA in the above lists.

Only the head and fuel reg was different. Everything else (block, bbm, etc) is exactly the same. I think the compliance plate has X stamped as the engine type... I'll check when I got for lunch and look under the bonnet.
Top
 Profile  
 
 
Posted: Fri Apr 21, 2006 7:26 pm 
Getting Side Ways
Offline

Posts: 436

Joined: 20th Jun 2005

Gallery: 1 images

Ride: Gli

Location: melbourne
VIC, Australia

oh i see...thankz for that it helps alot
Top
 Profile  
 
 
Posted: Fri Apr 21, 2006 9:15 pm 
Getting Side Ways
Offline
User avatar

Age: 28

Posts: 2983

Joined: 15th Apr 2006

Gallery: 5 images

Ride: Falcon

Location: Aberfoyle Park
SA, Australia

My old work had a EL tickford motor sitting there they never got started cause most the electrical was f**k over in the accident but the motor stayed in tact. Is there a way of putting the EL tickford in my EF GLi.
What do i need to do?

 

_________________

HOLDENS go like rockets. They fall apart in stages!!!

Top
 Profile  
 
 
Posted: Fri Apr 21, 2006 9:20 pm 
Getting Side Ways
Offline

Age: 51

Posts: 720

Joined: 18th Sep 2005

Ride: ef fairmont

Location: orange
NSW, Australia

you should'nt have any problems with it going in. as lone as you use your wiring harnes.
Top
 Profile  
 
 
Posted: Fri Apr 21, 2006 9:34 pm 
Getting Side Ways
Offline
User avatar

Age: 31

Posts: 4323

Joined: 17th Jan 2006

Ride: Soarer 2.5GT-T

Location: Cranbourne
VIC, Australia

yaeh the engine code is "X"
Top
 Profile  
 
 
Posted: Fri Apr 21, 2006 9:35 pm 
Getting Side Ways
Offline
User avatar

Posts: 3115

Joined: 20th Dec 2004

Ride: Falcon

Location: Adelaide
SA, Australia

stomper wrote:
My old work had a EL tickford motor sitting there they never got started cause most the electrical was f**k over in the accident but the motor stayed in tact. Is there a way of putting the EL tickford in my EF GLi.
What do i need to do?


pull the dizzy out and put the sequencer from the EF engine it, use the EF loom and ECU.

I would also swap the fuel reg from the EF otherwise it will run too rich.

 

_________________

Stoke me a clipper, I'll be back for Christmas

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 9 posts ] 

Who is online

Users browsing this forum: No registered users and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 18, 2017 8:51 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names