|
| scotty2611 |
|
|||
|
Does anyone Know about the fitment of ef 4Ltr into a eb II, and how hard was the fitment as in wiring loom
_________________ EB 2,Turbo EL Motor, Momo Wheel, Cam, Fuel preasure reg, LSD, Color coded boot garnish 17" wheels, Lowered, Shift kit, Slotted & cross Drilled Brakes, AU fuel injectors, & more to come |
|||
| Top | |
|||
| altedxr6 |
|
|||
|
depends if you want to use the EF BBM or the standard EB2 intake .
and also if you going to be using the clutch fan you need to change the water pump over for the EB2 one . can be done, quite easy, just depending as i said before, if your going to drop the EF motor with all the EF parts on it, or going to be using the EF motor with EB parts on it. I've got quite a few EF/EL motors into EA/EB/ED's using the standard setup for the EB2 motor. have to grind some of the alternator bracket away, and change timing chain case & H/B . |
|||
| Top | |
|||
| scotty2611 |
|
|||
|
wanting to use complete EF motor, I Will use the thermos and the inlet if possible
_________________ EB 2,Turbo EL Motor, Momo Wheel, Cam, Fuel preasure reg, LSD, Color coded boot garnish 17" wheels, Lowered, Shift kit, Slotted & cross Drilled Brakes, AU fuel injectors, & more to come |
|||
| Top | |
|||
| altedxr6 |
|
|||
|
Just make sure you get the ECU and looms, not to hard to do ..
|
|||
| Top | |
|||
| ReGiE |
|
|||
|
talk to brad (waggin) as he has done a complete engine swap in to his EB taxi (including dash and interior)
_________________ Gooooone - Eb2 Coon - 143RWKW |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 47 guests |
