el engine and trans into my ea 2 cfi

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Page 1 of 1 [ 4 posts ]

Post New Topic Post Reply

Previous topic Next topic

gusbus

Post subject: el engine and trans into my ea 2 cfi

Posted: Mon Jun 28, 2010 5:24 pm

Stock as a Rock

Offline

Age: 32

Posts: 137

Joined: 8th Apr 2010

Ride: Dohc el futura, ea falcon

Location: horsham
VIC, Australia

my ea wnt start it turns over with the el engine in it but wnt fire at all...ive got the smartlock imobilzer in and the fuel pump and ecu from the car the engine was in but nothing...the fuel pump run and the rail has fuel..also the el ecu is a duel fuel one...are the ea cfi ecu pinouts different to the el mpfi pinouts

Top

Profile

BenJ

Post subject: Re: el engine and trans into my ea 2 cfi

Posted: Mon Jun 28, 2010 5:48 pm

Getting Side Ways

Offline

Posts: 5503

Joined: 20th May 2005

Gallery: 11 images

Ride: EB1 Fairmont Ghia T5 Wagon

Location: Seven Hills, Sydney
NSW, Australia

If the EL ECU is dual fuel, it defaults to running on LPG.

This means the injectors are disabled by default. Hence it not starting.

You need to supply 12v to pin 8 to tell it to be in Petrol mode.

Cheers
BenJ

_________________

BenJ's EB T5 DOHC Ghia Wagon - Current Ride
BenJ's EB GL Sedan - Previous Ride
My respect and thanks go to - snap0964, Paulmac, SWC and MRE-50L

Top

Profile

gusbus

Post subject: Re: el engine and trans into my ea 2 cfi

Posted: Mon Jun 28, 2010 6:26 pm

Stock as a Rock

Offline

Age: 32

Posts: 137

Joined: 8th Apr 2010

Ride: Dohc el futura, ea falcon

Location: horsham
VIC, Australia

thanks... ok ive done that...i accidently had the wrong ecu in and it almost fired but then put the el one in and it wont fire at all still

Top

Profile

gusbus

Post subject: Re: el engine and trans into my ea 2 cfi

Posted: Fri Jul 02, 2010 7:53 pm

Stock as a Rock

Offline

Age: 32

Posts: 137

Joined: 8th Apr 2010

Ride: Dohc el futura, ea falcon

Location: horsham
VIC, Australia

the engine now starts but only for a couple of secs then dies..and i have no idea why it does...any help?????????

Top

Profile

Post New Topic Reply

Page 1 of 1 [ 4 posts ]

Jump to:

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Who is online
Users browsing this forum: Henderson and 62 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

It is currently Thu Apr 25, 2024 8:39 pm

All times are UTC + 11 hours