can anyone help with giving me details on how to put power windows in to the front for my el xr6 and remote central locking and how to swap over all the key barrels please

EL XR6 should have power windows already.....??????

To change out the barrel in the Ignition Lock assembly, you will need the original key to remove it......
Remove the plastic bottom cover off the steering column.
Insert key, and turn to the first position (Accessories),
Underneath the barrel assembly is a small hole, about 2.5 to 3mm in diameter.....insert a pin punch or similar into the hole and push in, and pull on the key at the same time....the barrel will come out.
To insert the new one, insert key and turn to acces, and pust the button in on the side of the barrel, and push into the housing.....ya done.

The rest of the barrels, you need to remove the door trims, and outer door handles to R&R them.

thisone doesnt have power windows? any idea how to swap them? ive got another el xr6 i can swap everything ova from its just rusted everywhere. and wat about the boot barrel? and remote central locking. also a power antenna. (sorry cant spell good)