|
| Falcon_92_EB |
|
||
|
My exaust is rattling and it only rattles at idle in drive, in park it dosent rattle.
im thinking the cat converter? Last edited by Falcon_92_EB on Tue Jul 07, 2015 7:49 pm, edited 1 time in total. |
||
| Top | |
||
| EL___Fairmont |
|
|||
|
check the rubber exhaust support that goes from the cat exit flange hanger to the rear gearbox hanger.
_________________ Current ride 2007 |
|||
| Top | |
|||
| Falcon_92_EB |
|
||
|
Will do tomorrow
 i was thinking cat because it sounds like its under the drivers seat. |
||
| Top | |
||
| phatba |
|
||
|
the ba did this once, turned out the rear hanger had broken off and was vibrating against the pipe.
|
||
| Top | |
||
| lee lee le bonk |
|
||
|
Yeah falcon exhaust rubbers have been crap since day one. I've changed hundreds of falcon mufflers and you always change the rear 3 rubbers because they will be well and truely stuffed before it needs the next exhaust, yet most jap cars, you never have to change rubbers cos their much better quslity design. Poor design Ford.
_________________ Fords Rule. OK. |
||
| Top | |
||
| splosh123 |
|
||
Age: 33 Posts: 168 Joined: 3rd Dec 2009 Ride: Falcon EL Option 20 Location: Redcliffe, Brisbane |
Have you lowered it recently? Mine does this since putting Lovell Ultra-lows in it.
Cheers Josh |
||
| Top | |
||
| lazybrennan |
|
||
|
Could be the cat screwed? Is it a stock exhaust? I know the stock exhaust has a heat sheild around them on some, And ford put metal ties around them and they get loose after a while. Check if you have anything like that.... I did. Also do you get it when you turn left or right? I had the same problem. It was just one of the rubber hangers fully stretched out. I have to replace it once every year or 2 now. Is it a stock exhaust tho?
|
||
| Top | |
||
| Falcon_92_EB |
|
||
|
yep stock, dont get while turning just at idle in Drive
|
||
| Top | |
||
| MadMatt |
|
|||
|
A stuffed baffle in your muffler or resi can do this.
_________________ Member Number 8804 |
|||
| Top | |
|||
| slammeb |
|
||
|
Mine was doing at 1,400rpm, got it changed for an epa and it still does it. I'm getting extractors fitting today and changing the cat so if it stops for mine i'd be certain it's the cat for you to.
|
||
| Top | |
||
| SLO247 |
|
||
|
Make sure the heat-shielding on the cat is still clamped tight, they come loose and rattle. While you are under there, check the hangers as stated.
Falcon exhausts are s**t, I have changed the exhaust on all 4 Falcons I have had. 
|
||
| Top | |
||
| Falcon_92_EB |
|
||
|
well i replaced the exaust in 2007 (only the tail pipe, deleted the rear muffler)we did this after i purchased the car in 2007 so the rest of the zorst could be an extra 1-5 years old!
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 106 guests |
