Fordmods Logo

exaust sound question 

 

Page 1 of 2 [ 26 posts ] Go to page 1, 2  Next

 
 Post subject: exaust sound question
Posted: Tue May 04, 2010 12:08 pm 
Parts Gopher
Offline

Age: 32

Posts: 67

Joined: 24th Mar 2010

Ride: 96 EL Futura

Location: hamilton
VIC, Australia

sorry if this isnt the right place 2 post this i looked for a similar topic but couldnt find any.
this is probably a simple question to answer

im wanting 2 know how to get a particular sound out of my car, the sound being the kind of crackling almost like backfiring on deceleration like a very lumpy idle but it rumbles really aggresivly. i love the sound haha despite if its bad for the car or not.

if any 1 can help me i appreiciate it alot , sorry if the details are confusing only words i could put to the sound lol
Top
 Profile  
 
 
 Post subject: Re: exaust sound question
Posted: Tue May 04, 2010 1:34 pm 
Getting Side Ways
Offline

Age: 34

Posts: 747

Joined: 8th Nov 2009

Ride: ford au

Location: brisbane
QLD, Australia

what about my sound, http://www.youtube.com/watch?v=dCq831Pcd9g

 

_________________

Daily Driver, Series 1 Au Forte

Quote:
Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors

Top
 Profile  
 
 
 Post subject: Re: exaust sound question
Posted: Tue May 04, 2010 1:51 pm 
Parts Gopher
Offline

Age: 32

Posts: 67

Joined: 24th Mar 2010

Ride: 96 EL Futura

Location: hamilton
VIC, Australia

ill check both of them asap, just cant while at school youtube blocked =(
Top
 Profile  
 
 
 Post subject: Re: exaust sound question
Posted: Tue May 04, 2010 1:55 pm 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

nathanwillox wrote:
ill check both of them asap, just cant while at school youtube blocked =(


shouldn't you be studying then?

Also the crackling/lumpy noise can't just be made from changing the exhaust. I think you want the V8 crackling noise...if that's the case you will first need a V8 if you haven't got one. Then need a lumpy cam and an exhaust to suit.

Not going to get the same effect out of a I6.

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
 Post subject: Re: exaust sound question
Posted: Tue May 04, 2010 3:36 pm 
Stock as a Rock
Offline

Posts: 156

Joined: 30th Jun 2008

Location: Melbourne
VIC, Australia

phongus wrote:
nathanwillox wrote:
ill check both of them asap, just cant while at school youtube blocked =(


shouldn't you be studying then?

Also the crackling/lumpy noise can't just be made from changing the exhaust. I think you want the V8 crackling noise...if that's the case you will first need a V8 if you haven't got one. Then need a lumpy cam and an exhaust to suit.

Not going to get the same effect out of a I6.

Wrong.

I had an AWESOME cracking/lumpy sound on my i6 before I had it tuned. It was there since I converted to manual, possibly a side effect of an auto ECU with resistor mod? When I had it tuned I also switched to an EL manual ecu and cracking effect is gone :(

 

_________________

1: Mum's car: ED XR6 wagon.zorst,stereo
2: My cars: Holden Monaro CV8-Z 2005. ls1 v8 :)
3: Nissan 180sx.sr20det, ~180rwkw.Lotsa mods,0-100 in 5.2secs.crashed into pole :(
4: EB2 Fairmont. 5spd,2.5" zorst,hi-flow cat,extractors,wade977b,j3, plus a 152dB 200psi train horn

Top
 Profile  
 
 
 Post subject: Re: exaust sound question
Posted: Tue May 04, 2010 3:51 pm 
Getting Side Ways
Offline

Age: 40

Posts: 1046

Joined: 31st Mar 2005

Gallery: 2 images

Ride: ef falcon, el fairmont ghia

Location: Christchurch
New Zealand

do you mean the burgle kinda noise? or an actual crackle? holden v8's do it and it sounds horrid.
my old ea used to do the burgle kinda noise on when i took my foot off, and that just had standard exhaust but with a hotdog.
Top
 Profile  
 
 
 Post subject: Re: exaust sound question
Posted: Tue May 04, 2010 3:58 pm 
Getting Side Ways
Offline

Posts: 593

Joined: 2nd Oct 2007

Power: 327 rwkw

Location: Perth
WA, Australia

My old EF II XR8 used to do it with a Lukey 3" straight through in Closed Loop first thing in the morning. Went away once it went open. Again..... the point being XR8
Top
 Profile  
 
 
 Post subject: Re: exaust sound question
Posted: Tue May 04, 2010 4:55 pm 
Stock as a Rock
Offline

Posts: 156

Joined: 30th Jun 2008

Location: Melbourne
VIC, Australia

i mean e.g. get to about 4000rpm, leave it in gear but take foot off accelerator. makes an epic 'popping' sound, sounds like an old muscle car. probably due to s**t afr's lol, since after tune it doesn't do that anymore...

 

_________________

1: Mum's car: ED XR6 wagon.zorst,stereo
2: My cars: Holden Monaro CV8-Z 2005. ls1 v8 :)
3: Nissan 180sx.sr20det, ~180rwkw.Lotsa mods,0-100 in 5.2secs.crashed into pole :(
4: EB2 Fairmont. 5spd,2.5" zorst,hi-flow cat,extractors,wade977b,j3, plus a 152dB 200psi train horn

Top
 Profile  
 
 
 Post subject: Re: exaust sound question
Posted: Tue May 04, 2010 5:02 pm 
NSW Cruise Moderator
Offline
User avatar

Age: 46

Posts: 7338

Joined: 5th Nov 2004

Gallery: 12 images

Ride: TE50

Location: ɹǝpun uʍop
NSW, Australia

you want the overrun crackle crackle crackle noise when you come off the throttle? Not from your I6 mate, wrong engine config. the I6 is a smooth motor and will not bang and f@rt when you pull your foot off the throttle, maybe a bad tune and rich as hell will start to achive what you are talking about, but, No.

 

_________________

Image

I have a car.

Top
 Profile  
 
 
 Post subject: Re: exaust sound question
Posted: Tue May 04, 2010 5:24 pm 
Smokin em up
Offline

Posts: 236

Joined: 1st Sep 2005

Ride: EL Ghia Tickford 5.0

Location: Adelaide
SA, Australia

Yes you can have the burble on decel, :roll:

Its caused from unburnt fuel entering the exhaust. Thats why a Auto ECU with a resistor mod in a manual car will make it happen. Auto's are designed to put a tiny amount of fuel in at all times (otherwise the car would stall) whereas manuals can shut the fuel off completely. so yea it can happen..

 

_________________

EL Fairmont Ghia 5.0
Sunroof - Leather - 3" Exhaust - 19" GTP's - Tickford Kit

Top
 Profile  
 
 
 Post subject: Re: exaust sound question
Posted: Tue May 04, 2010 5:40 pm 
Stock as a Rock
Offline

Posts: 156

Joined: 30th Jun 2008

Location: Melbourne
VIC, Australia

Mhgill wrote:
Yes you can have the burble on decel, :roll:

Its caused from unburnt fuel entering the exhaust. Thats why a Auto ECU with a resistor mod in a manual car will make it happen. Auto's are designed to put a tiny amount of fuel in at all times (otherwise the car would stall) whereas manuals can shut the fuel off completely. so yea it can happen..

Yes that would explain it. As when I got tuned I also got a manual EL ECU. Which made it stop :( You can buy me ED auto resistor-modded ecu if you want hehe

 

_________________

1: Mum's car: ED XR6 wagon.zorst,stereo
2: My cars: Holden Monaro CV8-Z 2005. ls1 v8 :)
3: Nissan 180sx.sr20det, ~180rwkw.Lotsa mods,0-100 in 5.2secs.crashed into pole :(
4: EB2 Fairmont. 5spd,2.5" zorst,hi-flow cat,extractors,wade977b,j3, plus a 152dB 200psi train horn

Top
 Profile  
 
 
 Post subject: Re: exaust sound question
Posted: Tue May 04, 2010 6:29 pm 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

paul09 wrote:
Mhgill wrote:
Yes you can have the burble on decel, :roll:

Its caused from unburnt fuel entering the exhaust. Thats why a Auto ECU with a resistor mod in a manual car will make it happen. Auto's are designed to put a tiny amount of fuel in at all times (otherwise the car would stall) whereas manuals can shut the fuel off completely. so yea it can happen..

Yes that would explain it. As when I got tuned I also got a manual EL ECU. Which made it stop :( You can buy me ED auto resistor-modded ecu if you want hehe


So why did my car sound smooth during acceleration, changing gears and deceleration with the resistor trick? Now I have a J3 chip, but it still didn't make much of a difference besides stopping the car from stalling.

I'd get my engine checked if it was making a crackling sound everytime I put my foot off the accelerator.

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
 Post subject: Re: exaust sound question
Posted: Tue May 04, 2010 6:44 pm 
Getting Side Ways
Offline

Age: 40

Posts: 1046

Joined: 31st Mar 2005

Gallery: 2 images

Ride: ef falcon, el fairmont ghia

Location: Christchurch
New Zealand

theres been few people lately that would rather a noise that sounds "cool" than a healthy car.
bit silly, your surpose to mod your car to make it better not worse
Top
 Profile  
 
 
 Post subject: Re: exaust sound question
Posted: Tue May 04, 2010 7:12 pm 
Parts Gopher
Offline

Age: 32

Posts: 67

Joined: 24th Mar 2010

Ride: 96 EL Futura

Location: hamilton
VIC, Australia

ah ok thanks for all help guys, i just wasnt sure about how to achieve the sound, i think it is the kind of v8 sound u hear, i only heard 1 car in town with it and its a holden ute but its only a 6 so i mite try catch him 1 day and ask him.
tx for all help
Top
 Profile  
 
 
 Post subject: Re: exaust sound question
Posted: Tue May 04, 2010 7:19 pm 
Parts Gopher
Offline

Age: 32

Posts: 67

Joined: 24th Mar 2010

Ride: 96 EL Futura

Location: hamilton
VIC, Australia

this was the kind of sound i was meaning the crackle and popping http://www.youtube.com/watch?v=1jC26HM8My0 =( y cant use p platers have 8s lol
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 2  [ 26 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 39 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu Mar 28, 2024 7:39 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names