|
| Rick_Deckard |
|
|||
|
Hoi,
Well the next thing I want to spend money on is the exhaust, rattles quite a bit now, rusting from the inside out apparantly, lol. Extractors in the topic name too because when you get a new exhaust (performance one), best to get good extrators too? So yeah, I'd like some indication of price for what I want done so I can have a target to save towards. So I need decent extrators and a decent exhaust system. And I plan to lower in future, and I remember some members mentioning being able to get them to kind of fit it up 'in' the chasis more? So that it's more dificult for your new system to get crushed on lower springs? Anyway, a price on 1. Extrators, 2. Exhaust (incl. cost to really nudge the exhaust up into the chasis more). Extrators and Exhaust best for an EF Fairmont that is. O, and ofcourse labour costs too. Cheers guys.
_________________ E39 523i |
|||
| Top | |
|||
| downingj |
|
||
|
I have the following:
Extractors, High flow cat and a 2 1/2" stainless steel exhaust. Cost (including labour) = $1800.00 The reason I went stainless is because the last mild steel exhaust I had rusted out within 12 months... |
||
| Top | |
||
| Rick_Deckard |
|
|||
|
-cries at price-
_________________ E39 523i |
|||
| Top | |
|||
| downingj |
|
||
|
Till_Lind wrote: -cries at price-
LOL. Yeah $1800.00 is pretty expensive. It took it up to over 130 rwk though which, in my opinion, is pretty good for the mod... Using stainless steel is the reason it cost so much. Stainless is expesive s**t (I should know, I work in the steel industry). Usually 3 x more expensive than the mild steel equivalent... |
||
| Top | |
||
| Rick_Deckard |
|
|||
|
downingj wrote: Till_Lind wrote: -cries at price- LOL. Yeah $1800.00 is pretty expensive. It took it up to over 130 rwk though which, in my opinion, is pretty good for the mod... Using stainless steel is the reason it cost so much. Stainless is expesive s**t (I should know, I work in the steel industry). Usually 3 x more expensive than the mild steel equivalent... Well whats a good brand that does mild steel that doesn't rust in 12 months? lol.
_________________ E39 523i |
|||
| Top | |
|||
| kermey |
|
|||
|
got my system inclucding extractors for $800
|
|||
| Top | |
|||
| smiley235 |
|
|||
|
Till_Lind wrote: downingj wrote: Till_Lind wrote: -cries at price- LOL. Yeah $1800.00 is pretty expensive. It took it up to over 130 rwk though which, in my opinion, is pretty good for the mod... Using stainless steel is the reason it cost so much. Stainless is expesive s**t (I should know, I work in the steel industry). Usually 3 x more expensive than the mild steel equivalent... Well whats a good brand that does mild steel that doesn't rust in 12 months? lol. just spray the whole exhaust with wd-40 every week lol
_________________ 178.3 rwkw
|
|||
| Top | |
|||
| Rick_Deckard |
|
|||
|
smiley235 wrote: Till_Lind wrote: downingj wrote: Till_Lind wrote: -cries at price- LOL. Yeah $1800.00 is pretty expensive. It took it up to over 130 rwk though which, in my opinion, is pretty good for the mod... Using stainless steel is the reason it cost so much. Stainless is expesive s**t (I should know, I work in the steel industry). Usually 3 x more expensive than the mild steel equivalent... Well whats a good brand that does mild steel that doesn't rust in 12 months? lol. just spray the whole exhaust with wd-40 every week lol Lol, nice one. kermey wrote: got my system inclucding extractors for $800
Yeah I'm liking that price a bit more.
_________________ E39 523i |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
downingj wrote: I have the following:
Extractors, High flow cat and a 2 1/2" stainless steel exhaust. Cost (including labour) = $1800.00 The reason I went stainless is because the last mild steel exhaust I had rusted out within 12 months... that alot even for stainless. i'd have done it for about 1200 to 13000 |
||
| Top | |
||
| downingj |
|
||
|
tickford_6 wrote: downingj wrote: I have the following: Extractors, High flow cat and a 2 1/2" stainless steel exhaust. Cost (including labour) = $1800.00 The reason I went stainless is because the last mild steel exhaust I had rusted out within 12 months... that alot even for stainless. i'd have done it for about 1200 to 13000 NOW ya tell me... 
It's all good. I love me Falc, she deserves the best. |
||
| Top | |
||
| twr7cx |
|
|||
|
heaps of threads on what people have got and how much. search button in top right corner...
|
|||
| Top | |
|||
| Rick_Deckard |
|
|||
|
twr7cx wrote: heaps of threads on what people have got and how much. search button in top right corner...
Lol, I've been using forums for a few years now mate, I know what that button does. I rarely have luck with it though.
_________________ E39 523i |
|||
| Top | |
|||
| qwerty68 |
|
|||
|
i agree the serch button sucks
_________________ Lukey Extractors 2.5" Exhaust 3.23:1 Diff 17" BA XR8 Alloys |
|||
| Top | |
|||
| downingj |
|
||
|
qwerty68 wrote: i agree the serch button sucks
I'll second that. And no offence to anyone that makes the suggestion of using the search button, but if you could find what you wanted to know (or could be F**k reading through the old info) you wouldn't be posting in the first place... |
||
| Top | |
||
| smiley235 |
|
|||
|
ill third that, sometimes when i use the search, i get the most random threads. One time, i was looking for the it's performance thread and it was such a struggle.
_________________ 178.3 rwkw
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 67 guests |
