|
| chickenman_86 |
|
||
|
hey there guys I have managed to get my car plugged into a scanner and these are the fault codes that have come up could anybody shed some light on what they might mean and what to check to fix them? Car is a EF XR6
10, 786, 522, 214, 916 Cheers guys
_________________ 2005 F6 Typhoon, 6 speed Manual. Stock as a rock |
||
| Top | |
||
| Deff |
|
||
|
Code: 786 PIL Output check fail Performance Indicator Light output is faulty. Can be caused by open circuit, or shorted to Ground, +12V 522 NDS - A/C On For KOEO test, the transmission must be in either Park, or Neutral, the A/C must also be turned off 214 CMP Sensor Input failed The signal from the CMP sensor has gone out of normal range. Could be caused by a faulty CMP sensor or wiring |
||
| Top | |
||
| chickenman_86 |
|
||
|
Would 214 be showing up due to aftermarket cam install? Or should I replace try replace it see if that fixes it?
_________________ 2005 F6 Typhoon, 6 speed Manual. Stock as a rock |
||
| Top | |
||
| nalane |
|
|||
|
916 is the code for the model of the ECU.
|
|||
| Top | |
|||
| chickenman_86 |
|
||
|
nalane wrote: 916 is the code for the model of the ECU. So its not actually a fault then? Cool thats one down then!
_________________ 2005 F6 Typhoon, 6 speed Manual. Stock as a rock |
||
| Top | |
||
| lee lee le bonk |
|
||
|
552 code means ur a/c was on during test. It's not a "real" code, just means you wearnt following the proper procedure when doing the test. ie the a/c was on when it wasn't supposed to be.
_________________ Fords Rule. OK. |
||
| Top | |
||
| nalane |
|
|||
|
chickenman_86 wrote: nalane wrote: 916 is the code for the model of the ECU. So its not actually a fault then? Cool thats one down then! 916 = EF XR6 tickford man. swb. 10 is not a fault code it is a group separator code |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 39 guests |
