|
| frd906n |
|
||
|
Hey guys,
Tonight i started the car up and from under the sump area im hearing this noise, its a tick/knock sound, now it only started after i put some of that nulon lifter free up treament stuff in, Would it be possible i have to much oil in the engine for it to handle Here is a video well, http://s649.photobucket.com/albums/uu21 ... eo0016.mp4 http://s649.photobucket.com/albums/uu21 ... eo0017.mp4
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
Last edited by frd906n on Sat Jun 12, 2010 3:00 pm, edited 1 time in total. |
||
| Top | |
||
| TROYMAN |
|
||
|
those links only take us to the home page..
why put lifter free up in it?? isnt this the low km engine you just put in?? |
||
| Top | |
||
| SV-Valiant |
|
||
|
frd906n wrote: Hey guys, Tonight i started the car up and from under the sump area im hearing this noise, its a tick/knock sound, now it only started after i put some of that nulon lifter free up treament stuff in, Would it be possible i have to much oil in the engine for it to handle Wouldnt be possible if you had too much oil if you checked it? Nulon Sucks |
||
| Top | |
||
| frd906n |
|
||
|
Links fixed
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
i know you said its coming from the sump but maybe its the lifters/HLA's
when i put my cam in my lifters were noisy as for a week or so. when cold they were fine but when my engine got warmed up f**k were they noisy , i thought they were f**k but after a good cruise and oil change there all sweet 
_________________ El XR6 Turbo |
|||
| Top | |
|||
| TROYMAN |
|
||
|
if that noise is coming from the bottom end? it could be a crook oil pump ? ... its hard to tell from those vids... more than likely a tick or tap noise would be a dud lifter..
|
||
| Top | |
||
| frd906n |
|
||
|
Cheers guys. she is due for her first 5000 kms service next weekend, so fresh oil and filter will be going in,
Any one recommend a good oil, will be changing the lifters soon as a start work
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| Johnson stroker |
|
|||
|
HPR 15.. Just depends on what viscosity you want to go for.
If you like nulon, Nulon street and track is ok.
_________________
|
|||
| Top | |
|||
| frd906n |
|
||
|
cheers, now i dont like nulon at all, well the lifter treatment anyways,
Ill let you no how i go
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| TROYMAN |
|
||
|
i just changed the oil in my mrs au which had a noisy top end even after a lifter and rocker change..
so we went from penrite hpr 10 to nulon 10W-30 Hi-Tech Fast Flowing Engine Oil and suprisingly the top end is much quieter now... ive been using penrite for years but just thought ill try something different and so far seems to be better.. 
|
||
| Top | |
||
| frd906n |
|
||
|
Hmmm sounds good troyman, see when i bought the engine it had a split in the seam of the sump and and leaked out, so the engine sat with no oil in it for about 3 to 4 months, so my first thoughts were seeing tho it had no oil and wasnt started for the peroid of time that the lifters and s**t were dry,
But i wil try that oil troyman and let ya no how i go with it
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| frd906n |
|
||
|
TROYMAN wrote: i just changed the oil in my mrs au which had a noisy top end even after a lifter and rocker change.. so we went from penrite hpr 10 to nulon 10W-30 Hi-Tech Fast Flowing Engine Oil and suprisingly the top end is much quieter now... ive been using penrite for years but just thought ill try something different and so far seems to be better.. I was using the penrite on my old engine, 20w 50, but seeing thought i didnt now what oil was used in the one i bought i assumed the oil i was using wouldnt hurt, but now i have assumed rong
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| Troy |
|
||
|
yea it sounds like the tappets but hard to tell from video, i wouldnt even bother with that lifter s**t.
i'd pull the cover off and investigate |
||
| Top | |
||
| frd906n |
|
||
|
Sorry guys about the vid, best i could get, and yeh its defintly lifters, ill do a oil change next week and see how it goes, if not ill put a new set of lifters in when i get back to work
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| ROYLTY |
|
||
|
Hi frd906n...
i had the same problem with my NC FAIRLANE with the 4.0L engine. i thought it was the oil pump which was f&%cked...but then i removed the inspection plate for the transmission (where the bell housing bolts to the rear of the motor) & found out that one of the Torque Converter Bolts was VERY loose!!! Have a look @ those first before doing what i did, & remove the whole engine out. lol PS: Let me know how u go! |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 44 guests |
