Fordmods Logo

Help with my EF GLI climate control vacuum lines. 

 

Page 1 of 1 [ 7 posts ] 

 
 Post subject: Help with my EF GLI climate control vacuum lines.
Posted: Tue Apr 11, 2006 7:51 pm 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 577

Joined: 5th Nov 2004

Ride: EF

Location: Wodonga
VIC, Australia

Ok after having the dash apart several times I've stuffed up the vacuum lines running to the back of my heater/aircon unit.
It was blowing hot air all the time, and when you pressed the recycle air button the air would only come out of the windscreen vents. Then I pulled it apart again, and changed a few hoses and all seemed to work fine.
But now when I try to turn the heater on, it only blows cold air.. All the other buttons seem to work fine…

Does anyone have a picture of where each line runs into the back of the unit??

Cheers
Top
 Profile  
 
 
Posted: Tue Apr 11, 2006 9:46 pm 
Getting Side Ways
Offline
User avatar

Posts: 1007

Joined: 21st Dec 2004

Ride: ED V8

Location: driving under the sun........now!
WA, Australia

Sounds more like a blend door issue.

When you say climate control, do you mean you have converted to Climate Control, or are you talking about the standard HVAC controls?

 

_________________

ED XR8 Spri-mitatio-nt

Top
 Profile  
 
 
Posted: Tue Apr 11, 2006 11:08 pm 
Technical Contributor
Offline
User avatar

Age: 59

Posts: 5659

Joined: 14th Jan 2005

Gallery: 10 images

Ride: 96 XH/97 EL

Location: South Coast
NSW, Australia

The EF/EL gregories manuals have pretty good wiring/vacuum diagrams of the std & climate control systems.

 

_________________

96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl
97 EL Futura S/W: LPG, Alarm, LED int Lts, Trip Comp, F/Lane Dome Lt, Climate Ctrl, T5 Conversion

Top
 Profile  
 
 
Posted: Tue Apr 11, 2006 11:08 pm 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 577

Joined: 5th Nov 2004

Ride: EF

Location: Wodonga
VIC, Australia

Just the standard GLi one, It says climate control on it.. :D
Top
 Profile  
 
 
Posted: Tue Apr 11, 2006 11:09 pm 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 577

Joined: 5th Nov 2004

Ride: EF

Location: Wodonga
VIC, Australia

snap0964 wrote:
The EF/EL gregories manuals have pretty good wiring/vacuum diagrams of the std & climate control systems.


Ok, In that case does anyone have a scanned copy of those pages??

Thanks.
Top
 Profile  
 
 
Posted: Sat Apr 15, 2006 5:31 pm 
Getting Side Ways
Offline
User avatar

Posts: 1007

Joined: 21st Dec 2004

Ride: ED V8

Location: driving under the sun........now!
WA, Australia

Just a thought. Make sure that your heater tap is not seized shut, or defaulting to the closed position and jamming.

Constant vacumn to the tap will also mean that your heater tap is always shut. (default (no vac) is open).

Try pulling the heater tap vac hose off the tap and manipulating the tap actuator a few times.....see if that gets it going.

 

_________________

ED XR8 Spri-mitatio-nt

Top
 Profile  
 
 
Posted: Sun Apr 16, 2006 3:39 pm 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 577

Joined: 5th Nov 2004

Ride: EF

Location: Wodonga
VIC, Australia

I'll give that a shot..

But I'm fairly shore there is something a miss behind the control unit, When I turn it to heat I can hear a constant vacuum leak..
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 7 posts ] 

Who is online

Users browsing this forum: Google Adsense [Bot] and 75 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Mar 29, 2024 11:21 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names