|
| || xXFalconXx || |
|
|||
|
hey guys just a quick question, im just wondering how do i got a bout changing the right hand indicator on my Falcon cause the lens has come off (typical problem for these models) If someone could let me know of direct me to a thread it would be much appreciated.
thanks
_________________ PH4490 Pacemaker Headers |
|||
| Top | |
|||
| krisisdog |
|
|||
|
Lift up the plastic cover piece in the engine bay and theres a screw, then just push the indicator towards the front of the car and it should slide out.
|
|||
| Top | |
|||
| Esteven8 |
|
|||
|
Just be very careful when putting the new indicator back in, use very gentle pressure to get the locating pins into their positions. Mine were out of shape, and lets just say the lens' on those things aren't very strong .
_________________ dc_todd wrote: Cheap pads squeal like cheap hookers, and you can take that to the bank. Au Fairmont Ghia My (Old) 95 EF Wagon |
|||
| Top | |
|||
| || xXFalconXx || |
|
|||
|
krisisdog wrote: Lift up the plastic cover piece in the engine bay and theres a screw, then just push the indicator towards the front of the car and it should slide out. how many screws on the indicator, will the battery not be a problem?
_________________ PH4490 Pacemaker Headers |
|||
| Top | |
|||
| Esteven8 |
|
|||
|
One screw on the top of the indicator, right next to the headlight. Battery will not be an issue.
Here.. Attachment: th_28012011266.jpg [ 3.67 KiB | Viewed 6571 times ]
_________________ dc_todd wrote: Cheap pads squeal like cheap hookers, and you can take that to the bank. Au Fairmont Ghia My (Old) 95 EF Wagon |
|||
| Top | |
|||
| || xXFalconXx || |
|
|||
|
Esteven8 wrote: One screw on the top of the indicator, right next to the headlight. Battery will not be an issue. Here.. Attachment: th_28012011266.jpg thanks alot , ill give it a crack 2moro if its not raining lol
_________________ PH4490 Pacemaker Headers |
|||
| Top | |
|||
| || xXFalconXx || |
|
|||
|
are u guys sure your talking about this car, cause i lifted up the plastic cover and there is a metal plate underneth it. and alll along the sides there a pipes so i dunno
_________________ PH4490 Pacemaker Headers |
|||
| Top | |
|||
| Esteven8 |
|
|||
|
EF Falcon, same as mine. The screw IS there, I did the same job about a week ago. Not sure what pipes you have there. On the pic I posted it's looking down on the drivers side h/light from the engine bay side. The silver spear like thing coming in from the right is the body of the car above the indicator lens. The screw you have to undo is pretty much at the end of that.
Hope this helps.
_________________ dc_todd wrote: Cheap pads squeal like cheap hookers, and you can take that to the bank. Au Fairmont Ghia My (Old) 95 EF Wagon |
|||
| Top | |
|||
| Nathanhrv |
|
||
|
yeah mate i replaced all my indicator and headlight covers last week, after you pop ur bonnet make sure you removed the black plastic cover that is on top of the headlight covers and bonnet release its held in by about 8 or so scrivets, after that you will be able to see the tops of the headlight covers and also the screw that holds the indicator in place. Remove this screw as said before by Esteven and then simply slide the indicator out from the front of the car. The electrical connections will stil be connected to the headlight cover so simply detach this by pulling it and then its removed.
goodluck mate |
||
| Top | |
||
| bwian |
|
||
|
Onya Fordmods. One screw after lifting the plastic cover. so easy thanks for the info.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 56 guests |
