Fordmods Logo

Installing new injectors 

 

Page 1 of 1 [ 8 posts ] 

 
 Post subject: Installing new injectors
Posted: Sat May 28, 2005 1:01 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 1680

Joined: 5th Nov 2004

Gallery: 1 images

Ride: 220kw 1600 Datto

Location: Scaaabz
WA, Australia

Hey
new injectors goin in today

Do i have to use a grease or somehting when putting in the new ones?
Is it "rubber grease" ? or somethin different...?

and i have to undo the fuel rail, just the bolts, and then take the fuel cap out to release pressure b4 taking injectors out..?

 

_________________

Image

Top
 Profile  
 
 
Posted: Sat May 28, 2005 1:31 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 2282

Joined: 14th Jan 2005

Gallery: 8 images

Ride: ED Fairmont Ghia & EF XR8

Location: Melbourne
VIC, Australia

not sure about greasing the injectors but to release fuel presure within the lines just take out the fuel pump relay and start the car i should run for a few seconds then conk out once it cuts out crank the engine for a few mmore seconds. once all of the above have been done you wil have no pressure and fuel for that matter in the lines/rail.

hope this helps

 

_________________

Image

Top
 Profile  
 
 
Posted: Sat May 28, 2005 1:34 pm 
Getting Side Ways
Offline
User avatar

Age: 70

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

Yep just undo fuel rail I use 2 stroke slid them in and put those clips over end to hold them in place...

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Top
 Profile  
 
 
Posted: Sat May 28, 2005 6:01 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 1680

Joined: 5th Nov 2004

Gallery: 1 images

Ride: 220kw 1600 Datto

Location: Scaaabz
WA, Australia

cool, the injectors are in. Im just waiting for the fuel to evaporate so i dont blow up!

easy peezy, i just turned of the fuel pump tho my EMS, easier then pulling fuses :p

 

_________________

Image

Top
 Profile  
 
 
Posted: Sat May 28, 2005 6:05 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 2282

Joined: 14th Jan 2005

Gallery: 8 images

Ride: ED Fairmont Ghia & EF XR8

Location: Melbourne
VIC, Australia

SVO XR6 wrote:
cool, the injectors are in. Im just waiting for the fuel to evaporate so i dont blow up!

i just turned of the fuel pump tho my EMS, easier then pulling fuses :p


lol not all of us have the luxury of aftermarket engine managment

 

_________________

Image

Top
 Profile  
 
 
Posted: Sat May 28, 2005 7:13 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 1680

Joined: 5th Nov 2004

Gallery: 1 images

Ride: 220kw 1600 Datto

Location: Scaaabz
WA, Australia

very very happy with them :D

fanks to Waggin

It idles better, more responsive but i havent hit top rpm as its not tuned. Thats where it will make the big difference.

makes me think that one of my other injectors was leaking or dodgy :?

only the dyno will tell, and the fuel guage :p

 

_________________

Image

Top
 Profile  
 
 
Posted: Sat May 28, 2005 9:16 pm 
Tyre Shredder
Offline
User avatar

Age: 39

Posts: 371

Joined: 28th Jan 2005

Ride: EF Fairmont

Location: Perth
WA, Australia

wot injectors did u get, and how much they cost?
rekon doin somthin like that to any falcon will be an inprovment?

 

_________________

EF XR8 - 5speed, Extractors & Exhaust

Top
 Profile  
 
 
Posted: Sat May 28, 2005 10:17 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 1680

Joined: 5th Nov 2004

Gallery: 1 images

Ride: 220kw 1600 Datto

Location: Scaaabz
WA, Australia

wont make diddly squat unless you need them
generaly the std ones are good for 180rwkw(250rwhp) ish

i got waggin's old 24lb injectors

 

_________________

Image

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 8 posts ] 

Who is online

Users browsing this forum: Google [Bot] and 90 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Apr 26, 2024 3:40 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names