I have an EB II s pack about 330k that has just developed a problem with the ignition key and was wondering if anyone else has been through it. When you turn key to the on position all works well, then turn it to start and every thing gose dead. I have found that if you move key around in the barrell it will start.could it be key thats worn out or a problem with the electronics at the end of the barrell.

ITsounds like you barall is stuffed to replace it tack the cover off around the sterring collem .put key back in the ignition put it on acs ther is a small hole in the ignition collom put a pin or small pice of wire.in it and push it in and pull on the baral it will come out and just put the new baral in it will lock in place.i hope this helps you out