|
| fpv_1 |
|
|||
|
I just drained my oil n replaced the filter and put new magnatec 15w-40 in right.... but now my motors mate a knocking noise... like the lifters or some s**t.. its really s**t me and i dont want it to get worse.. ideas??
|
|||
| Top | |
|||
| bazz |
|
||
|
i would not use casterol use penrite 10w-50.how long was it from your last oil change .it might not like that oil ive found if i let my cars go over 3000ks between changes thay rattle for heaps?
|
||
| Top | |
||
| fpv_1 |
|
|||
|
bazz wrote: i would not use casterol use penrite 10w-50.how long was it from your last oil change .it might not like that oil ive found if i let my cars go over 3000ks between changes thay rattle for heaps?
well ive already put it in so its too late. i service it every 10.000 but let this one run out to 17,000 since my last service... i just dont want something to....break |
|||
| Top | |
|||
| old_mate |
|
|||
|
well it aint going to stop rattling till you throw in some 20w-50 unless you replace all the HLA's
_________________ too many rabbits in china |
|||
| Top | |
|||
| fpv_1 |
|
|||
|
old_mate wrote: well it aint going to stop rattling till you throw in some 20w-50 unless you replace all the HLA's
so u rkn that replacing that oil with a slightly thicker oil is gonna make all that noise stop... whats hla's |
|||
| Top | |
|||
| Soulfire |
|
|||
|
fpv_1 wrote: old_mate wrote: well it aint going to stop rattling till you throw in some 20w-50 unless you replace all the HLA's so u rkn that replacing that oil with a slightly thicker oil is gonna make all that noise stop... whats hla's yeah your lifters are f**k, so a thicker oil conceals the noise a bit. |
|||
| Top | |
|||
| old_mate |
|
|||
|
HLA - Hydraulic Lash Adjuster. Commonly referred to as lifters. And yes, going to a slightly thicker oil *should* help you out. I went from 20w-60 down to -50 with no problems, good oil pressure, but i think -40 would have stretched it
_________________ too many rabbits in china |
|||
| Top | |
|||
| Gaz |
|
||
|
im usinga 15w-60 atm.. 1 HLA taps for a few minutes on a cold startups since putting a cam in. doesnt really bother me, goes away once oil gets up there.
next oil change im going down to a 15w-40. hopefully get the oil to the head and silence it abit quicker
_________________ 2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows |
||
| Top | |
||
| rushed |
|
|||
|
im on 15-40 magnatek been using it for the last 4 oil changes bout 20,000k (5k intervals) but i also get a hla noise for a few seconds 2>3 on a 3' morning start.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 52 guests |
