Fordmods Logo

manual convertion problems 

 

Page 1 of 1 [ 12 posts ] 

 
 Post subject: manual convertion problems
Posted: Tue Feb 21, 2006 6:20 pm 
Oompa Loompa
Offline
User avatar

Age: 36

Posts: 38

Joined: 13th Feb 2006

Gallery: 7 images

Ride: eb

Location: perth
WA, Australia

hello dus enyone have a tach sheet or a site that help with manual conversions i just hade mine dun and i am having a cuple of problems mt speedo dusent work and there is a grinding noise when i have my cluch out eny help is wellcome plzzz



i have looked under the car at the gear box and there is 2 red and black little pluges and 2 orende and black pluges thay are all pluged in dus enyone no with one controles the speedo and km


plzz help me lol


cheers ross

 

_________________

EB 92
5 speed manual
17 inch amg trilogy cromes
GT BODY KIT AND A STAGE 2 CAM ON THE WAY

Top
 Profile  
 
 
Posted: Tue Feb 21, 2006 6:22 pm 
Oompa Loompa
Offline
User avatar

Age: 36

Posts: 38

Joined: 13th Feb 2006

Gallery: 7 images

Ride: eb

Location: perth
WA, Australia

sorry about the spelling i was in a hurry eny help is welcome plzz

 

_________________

EB 92
5 speed manual
17 inch amg trilogy cromes
GT BODY KIT AND A STAGE 2 CAM ON THE WAY

Top
 Profile  
 
 
Posted: Tue Feb 21, 2006 6:32 pm 
Tyre Shredder
Offline
User avatar

Age: 39

Posts: 376

Joined: 21st Nov 2004

Gallery: 12 images

Ride: BA Ford Fairmont 5.4L

Location: Gold Coast
QLD, Australia

search

 

_________________

http://www.sipheren.com

Top
 Profile  
 
 
Posted: Tue Feb 21, 2006 7:15 pm 
Technical Contributor
Offline
User avatar

Age: 38

Posts: 3097

Joined: 5th Nov 2004

Gallery: 29 images

Ride: VU SS

Location: Ivanhoe
NSW, Australia

Speedo sender has a White, 3 pin plug.

 

_________________

EF Fairmont now Sold!
Guides: Polishing|Modifications |Manual Conversion

Top
 Profile  
 
 
 Post subject: 3 pins
Posted: Tue Feb 21, 2006 9:29 pm 
Oompa Loompa
Offline
User avatar

Age: 36

Posts: 38

Joined: 13th Feb 2006

Gallery: 7 images

Ride: eb

Location: perth
WA, Australia

yer i have check that that is all good i duno what ellc it could be is the auto ecu and the manual the same or would that be doing htis cos ihave a auto ecu

 

_________________

EB 92
5 speed manual
17 inch amg trilogy cromes
GT BODY KIT AND A STAGE 2 CAM ON THE WAY

Top
 Profile  
 
 
Posted: Tue Feb 21, 2006 10:25 pm 
Getting Side Ways
Offline
User avatar

Age: 60

Posts: 744

Joined: 11th Nov 2004

Gallery: 15 images

Ride: ED Falcon

Location: Adelaide
SA, Australia

Fuk didn dey tichya ta spik n rite n skule

 

_________________

I post here cos the russian tank driver doesn't

Top
 Profile  
 
 
 Post subject: wtf
Posted: Tue Feb 21, 2006 10:38 pm 
Oompa Loompa
Offline
User avatar

Age: 36

Posts: 38

Joined: 13th Feb 2006

Gallery: 7 images

Ride: eb

Location: perth
WA, Australia

what dus that last most sya in english sorry

 

_________________

EB 92
5 speed manual
17 inch amg trilogy cromes
GT BODY KIT AND A STAGE 2 CAM ON THE WAY

Top
 Profile  
 
 
 Post subject: Re: 3 pins
Posted: Tue Feb 21, 2006 10:38 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 2282

Joined: 14th Jan 2005

Gallery: 8 images

Ride: ED Fairmont Ghia & EF XR8

Location: Melbourne
VIC, Australia

GIANT wrote:
yer i have check that that is all good i duno what ellc it could be is the auto ecu and the manual the same or would that be doing htis cos ihave a auto ecu


your first problem is running the car with the auto ecu. you can by pass the siginals sent from the ecu to the trans. to stop it from trying to shift gears. im not sure how to do but if read on here many times about it so do a search.

with your grinding noise, if it only happens when you push the clutch in then it will be an incorectly fitted throw-out bearing or f**k throw - out bearing wither way the box is going to have to come out and this needs to be inspected.

did you do the conversion or was it done by a mechanic etc.

cheers

 

_________________

Image

Top
 Profile  
 
 
 Post subject: grinding
Posted: Tue Feb 21, 2006 10:49 pm 
Oompa Loompa
Offline
User avatar

Age: 36

Posts: 38

Joined: 13th Feb 2006

Gallery: 7 images

Ride: eb

Location: perth
WA, Australia

the griding is when i let the cluch out so when it is siting there ideling it like ratels and grinds sound bad is that the same hting dus the box need a bit of a recon ?

i will havew a look about the ecus thnx for the hwlp mate


cheers


ross

 

_________________

EB 92
5 speed manual
17 inch amg trilogy cromes
GT BODY KIT AND A STAGE 2 CAM ON THE WAY

Top
 Profile  
 
 
Posted: Tue Feb 21, 2006 11:09 pm 
Technical Contributor
Offline
User avatar

Age: 38

Posts: 3097

Joined: 5th Nov 2004

Gallery: 29 images

Ride: VU SS

Location: Ivanhoe
NSW, Australia

Could be bad case of nuetral rumble, or could be what I had when mine was making a similar noise ages ago - the throwout bearing.
I just used a second hand one when I first got my manual conversion done and that was the cause.
The noise has gone away now after replacing the clutch and the throwout bearing.

Do a search on how to trick the auto ECU, I found no difference between running either.

 

_________________

EF Fairmont now Sold!
Guides: Polishing|Modifications |Manual Conversion

Top
 Profile  
 
 
Posted: Wed Feb 22, 2006 5:47 pm 
Oompa Loompa
Offline
User avatar

Age: 38

Posts: 26

Joined: 17th Dec 2005

Ride: EA 5SP

Location: whyalla
SA, Australia

i had the grinding problem on my car when i put a new clutch in,
when i release the clutch a grinding noise appeared but wasnt that noticab le i only heard it when i was in the hungry jacks drive throughs n stuff close to walls so it echoed a little......
anyway i just left it..... it went away
prolly not the best help but thats what i did.
Top
 Profile  
 
 
 Post subject: yer
Posted: Wed Feb 22, 2006 10:51 pm 
Oompa Loompa
Offline
User avatar

Age: 36

Posts: 38

Joined: 13th Feb 2006

Gallery: 7 images

Ride: eb

Location: perth
WA, Australia

i will ge tthe box out and see what thay think about it then thnx for the help

 

_________________

EB 92
5 speed manual
17 inch amg trilogy cromes
GT BODY KIT AND A STAGE 2 CAM ON THE WAY

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 12 posts ] 

Who is online

Users browsing this forum: No registered users and 58 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Mar 29, 2024 9:50 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names