hey all, just wondering if anyone knows or has tried this... i have a throttle body injected falcon and i'm fitting multiple point injection to it. It has the same plug as the throttle body injection. can i plug it straight in without changing anything?

any help appreciated.

cheers

This reply is off topic but I had to say it...

Those DIRTY Bugs!!

Do a search mate you will find heaps of threads. I have done this mod a few years back, it was a piece of piss. But you need to get a few things like

1) A/C compressor bracket and belt for MPI
2) MPI wiring loom
3) MPI dizzy ( On the hall pickup one slot is half the size as the other 6 slots.)
4) MPI ECU
5) MPI dipstick
6) MPI Fuel Pump
7) MPI manifold,fuel regulator, injectors, throttle body and wiring harness
8) MPI throttle cable
9) MPI airbox, intake pipe and snorkel
10) New Heater Hoses
11) MPI inlet Manifold Gasket
12) And some auto cabling to wire up the ISC valve and PIP signal of the TFI plug if you get the harness without the pink bullet plug.

Cheers......