Fordmods Logo

msd coil and leads? 

 

Page 1 of 2 [ 17 posts ] Go to page 1, 2  Next

 
 Post subject: msd coil and leads?
Posted: Thu Oct 22, 2009 6:58 pm 
Parts Gopher
Offline

Age: 33

Posts: 84

Joined: 9th Jul 2009

Ride: xr6 au 111

Location: perth
WA, Australia

how hard is it to install a new MSD coil pack on an au falcon xr6 series 1 .and also if i put a new coil pak and msd leads on what changes to the cars preformance would it make?
Top
 Profile  
 
 
 Post subject: Re: msd coil and leads?
Posted: Thu Oct 22, 2009 9:30 pm 
Getting Side Ways
Offline

Posts: 6449

Joined: 11th Nov 2004

there is no MSD coil pack for the AU or EF 6cyl.
Top
 Profile  
 
 
 Post subject: Re: msd coil and leads?
Posted: Thu Oct 22, 2009 9:30 pm 
Parts Gopher
Offline

Age: 33

Posts: 84

Joined: 9th Jul 2009

Ride: xr6 au 111

Location: perth
WA, Australia

s**t i rang repco they sed they had one?
Top
 Profile  
 
 
 Post subject: Re: msd coil and leads?
Posted: Sat Oct 24, 2009 4:27 pm 
Getting Side Ways
Offline
User avatar

Age: 47

Posts: 3785

Joined: 5th Nov 2004

Ride: Ford

Location: Victoria
VIC, Australia

ryanalder wrote:
s**t i rang repco they sed they had one?


I wouldn't take what Repco say too seriously

 

_________________

Image

Top
 Profile  
 
 
 Post subject: Re: msd coil and leads?
Posted: Sun Oct 25, 2009 1:37 pm 
Getting Side Ways
Offline

Age: 42

Posts: 9452

Joined: 9th Nov 2004

Gallery: 4 images

Ride: Fordrunner 5.0 Turbo

Location: Wollongong
NSW, Australia

Are there any aftermarket coil packs available for the SOHC 6 or do we have to get some Yankie V6 coils adapted to fit?
Top
 Profile  
 
 
 Post subject: Re: msd coil and leads?
Posted: Sun Oct 25, 2009 8:34 pm 
Getting Side Ways
Offline

Posts: 6449

Joined: 11th Nov 2004

xcabbi wrote:
Are there any aftermarket coil packs available for the SOHC 6 or do we have to get some Yankie V6 coils adapted to fit?


the US stuff is the same anyway. the leads fit and wiring fits. some have slightly different mounting holes. But i'd be moving the coil from it stock location anyway.
Top
 Profile  
 
 
 Post subject: Re: msd coil and leads?
Posted: Sun Oct 25, 2009 8:47 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 480

Joined: 10th Feb 2005

Gallery: 28 images

Ride: EF Fairmont Station Wagon.

Power: 150 rwkw

Location: Mandurah
WA, Australia

The Screamin demon 31737 will fit the AU 2-3 with plug leads and harness connector pluging straight up as Grimketel has done. The Screamin demon 31736 and the 31738 as with the Accel 140036 fit the EF and AU1 harness connector but the coil end of the leads are different, I am currently trying to source a set of leads to suit but this is proving a challenge. As tickford_6 said the mounting holes will be different but easy enough to get around.

 

_________________

4.0L EF Fairmont Station Wagon. EL GT Snorkel. K&N Pod in air box. 3" Intake piping.
Home port job. 1636 Wade cam. Wildcat Extractors, 2 1/2" cat and exhaust.
2200/2400rpm Dominator More Stall. Stage two mechanical shift kit. 3.73 4 pinion LSD. 15.078 @ 92mph.

Top
 Profile  
 
 
 Post subject: Re: msd coil and leads?
Posted: Sun Oct 25, 2009 10:12 pm 
Getting Side Ways
Offline

Posts: 6449

Joined: 11th Nov 2004

WagonDad wrote:
The Screamin demon 31737 will fit the AU 2-3 with plug leads and harness connector pluging straight up as Grimketel has done. The Screamin demon 31736 and the 31738 as with the Accel 140036 fit the EF and AU1 harness connector but the coil end of the leads are different, I am currently trying to source a set of leads to suit but this is proving a challenge. As tickford_6 said the mounting holes will be different but easy enough to get around.


what car are the 31736 and 31738 coils designed for? I may have some Crane Fire Wire leads at work.
Top
 Profile  
 
 
 Post subject: Re: msd coil and leads?
Posted: Sun Oct 25, 2009 10:48 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 480

Joined: 10th Feb 2005

Gallery: 28 images

Ride: EF Fairmont Station Wagon.

Power: 150 rwkw

Location: Mandurah
WA, Australia

tickford_6 wrote:
what car are the 31736 and 31738 coils designed for? I may have some Crane Fire Wire leads at work.


The 31736 and the Accell 140036 are for a 99-00 V6 mustang, I dont know about the 31738. These pic's show what is needed.

 

 

Attachments:
acc-140036_w_m.jpg
acc-140036_w_m.jpg [ 18.42 KiB | Viewed 2855 times ]
Accel Plug end.bmp
Accel Plug end.bmp [ 91.46 KiB | Viewed 2856 times ]

 

_________________

4.0L EF Fairmont Station Wagon. EL GT Snorkel. K&N Pod in air box. 3" Intake piping.
Home port job. 1636 Wade cam. Wildcat Extractors, 2 1/2" cat and exhaust.
2200/2400rpm Dominator More Stall. Stage two mechanical shift kit. 3.73 4 pinion LSD. 15.078 @ 92mph.

Top
 Profile  
 
 
 Post subject: Re: msd coil and leads?
Posted: Sun Oct 25, 2009 11:13 pm 
Getting Side Ways
Offline

Posts: 6449

Joined: 11th Nov 2004

I'll see what i've got tomorrow.
i couldn't guaranty the length would be right for stock coil location though.
Top
 Profile  
 
 
 Post subject: Re: msd coil and leads?
Posted: Wed Oct 28, 2009 7:03 pm 
Getting Side Ways
Offline

Posts: 6449

Joined: 11th Nov 2004

sorry mate, no luck on the leads
Top
 Profile  
 
 
 Post subject: Re: msd coil and leads?
Posted: Wed Oct 28, 2009 8:26 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 480

Joined: 10th Feb 2005

Gallery: 28 images

Ride: EF Fairmont Station Wagon.

Power: 150 rwkw

Location: Mandurah
WA, Australia

tickford_6 wrote:
sorry mate, no luck on the leads


Thanks for trying. I spoke to Eagle leads yesterday and they suggested the AU V8 leads might have the correct ends to fit the Accel coil, went to Repco today and tried the AU V8 leads and they fit, but there to short and have 90 degree plug ends. The Repco guy did come up with a good idea though, he has seen male to male adapters that would fit into the coil and then into the standard coil end of the lead allowing me to stick with my leads or upgrade to something better and keep it standard, standard = cheaper.

 

_________________

4.0L EF Fairmont Station Wagon. EL GT Snorkel. K&N Pod in air box. 3" Intake piping.
Home port job. 1636 Wade cam. Wildcat Extractors, 2 1/2" cat and exhaust.
2200/2400rpm Dominator More Stall. Stage two mechanical shift kit. 3.73 4 pinion LSD. 15.078 @ 92mph.

Top
 Profile  
 
 
 Post subject: Re: msd coil and leads?
Posted: Mon Nov 02, 2009 6:59 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 480

Joined: 10th Feb 2005

Gallery: 28 images

Ride: EF Fairmont Station Wagon.

Power: 150 rwkw

Location: Mandurah
WA, Australia

Finally sorted a set of leads to fit the accel 140036 coil, Auto One are supplying all the Top Gun parts including 300MAX wire for $118 plus postage, and i will make them up myself with the help of the Auto One shop. You need AU V8 coil ends, standard straight plug ends and 6 meters of wire. In hindsight I would have gone with the Screamin Demon 31737 some new AU2-3 leads and swapped the EF coil harness connector over to a AU2-3 harness connector.

 

_________________

4.0L EF Fairmont Station Wagon. EL GT Snorkel. K&N Pod in air box. 3" Intake piping.
Home port job. 1636 Wade cam. Wildcat Extractors, 2 1/2" cat and exhaust.
2200/2400rpm Dominator More Stall. Stage two mechanical shift kit. 3.73 4 pinion LSD. 15.078 @ 92mph.

Top
 Profile  
 
 
 Post subject: Re: msd coil and leads?
Posted: Mon Nov 02, 2009 8:08 pm 
Getting Side Ways
Offline

Posts: 6449

Joined: 11th Nov 2004

WagonDad wrote:
Finally sorted a set of leads to fit the accel 140036 coil, Auto One are supplying all the Top Gun parts including 300MAX wire for $118 plus postage, and i will make them up myself with the help of the Auto One shop. You need AU V8 coil ends, standard straight plug ends and 6 meters of wire. In hindsight I would have gone with the Screamin Demon 31737 some new AU2-3 leads and swapped the EF coil harness connector over to a AU2-3 harness connector.



Good to know you have it sorted.

Was the reason you bought that coil purely because it had the right harness connector?
Top
 Profile  
 
 
 Post subject: Re: msd coil and leads?
Posted: Mon Nov 02, 2009 9:35 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 480

Joined: 10th Feb 2005

Gallery: 28 images

Ride: EF Fairmont Station Wagon.

Power: 150 rwkw

Location: Mandurah
WA, Australia

tickford_6 wrote:
WagonDad wrote:
Finally sorted a set of leads to fit the accel 140036 coil, Auto One are supplying all the Top Gun parts including 300MAX wire for $118 plus postage, and i will make them up myself with the help of the Auto One shop. You need AU V8 coil ends, standard straight plug ends and 6 meters of wire. In hindsight I would have gone with the Screamin Demon 31737 some new AU2-3 leads and swapped the EF coil harness connector over to a AU2-3 harness connector.



Good to know you have it sorted.

Was the reason you bought that coil purely because it had the right harness connector?


Yes I thought getting leads to suit would be the easy part, but I think changing the harness connector would be easier if the connector was readily available.

 

_________________

4.0L EF Fairmont Station Wagon. EL GT Snorkel. K&N Pod in air box. 3" Intake piping.
Home port job. 1636 Wade cam. Wildcat Extractors, 2 1/2" cat and exhaust.
2200/2400rpm Dominator More Stall. Stage two mechanical shift kit. 3.73 4 pinion LSD. 15.078 @ 92mph.

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 2  [ 17 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: Google [Bot], Google Adsense [Bot] and 65 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Mar 29, 2024 10:09 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names