|
| Glowing EF |
|
||
|
ok just to make sure, i cut the dark green wire with the stripe behind the cluster, and connect it to the cable that comes with the oil pressure gauge then wire the power wires up (illumination) and thats it? that was jsut to get an idea it was mainly for braidy.
thanks for taking the time to explain to me |
||
| Top | |
||
| 66 coupe |
|
||
|
in that case (now that your talking about oil pressure)
look here http://www.fordmods.com/forums/documents.php?doc=14 take the time to read through it, Look for White / red stripe on pin 18 on the back of the cluster |
||
| Top | |
||
| Glowing EF |
|
||
|
which side though because the cluster has to plugs on the left and right?
|
||
| Top | |
||
| 66 coupe |
|
||
|
66 coupe wrote: in that case (now that your talking about oil pressure)
look here http://www.fordmods.com/forums/documents.php?doc=14 take the time to read through it, Look for White / red stripe on pin 18 on the back of the cluster "take the time to read through it" you will see that there are different amount of pins on each plug.  
edit: let me clarify, there are a different amount of used pins on each plug, also each pin is detailed on that document with the associated wire colour. it can be too hard to find a white wire with a red stripe that would be 2 pins in from the end of the connector? |
||
| Top | |
||
| Glowing EF |
|
||
|
ok thanks for all your help
|
||
| Top | |
||
| Glowing EF |
|
||
|
ok so as far as i understood i cut the white and red wire from the back of the right plug onthe cluster and connect it with the cable on the guage and then connect illumination. and im all set
|
||
| Top | |
||
| 66 coupe |
|
||
|
pretty much
you can power the guage from the cluster too, splice into the ignition feed and ground wires |
||
| Top | |
||
| Glowing EF |
|
||
|
ok cool thanks alot
|
||
| Top | |
||
| Glowing EF |
|
||
|
do i have to replace the oil switch with the oil sencor, since i just got the light not the actual oil gauge??? or it will be alright and still work if i just cut the wire and connect with the oil gauge cable?
|
||
| Top | |
||
| Commando |
|
||
|
Wow
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 39 guests |