Fordmods Logo

Pwr steer belt jumping off?? 

 

Page 1 of 1 [ 9 posts ] 

 
 Post subject: Pwr steer belt jumping off??
Posted: Sun Sep 18, 2005 12:43 pm 
Getting Side Ways
Offline
User avatar

Posts: 1960

Joined: 6th Nov 2004

Gallery: 22 images

Power: 315 rwkw

Location: Under the flight path of incoming packpackers
NSW, Australia

I've done it up as tight as, and put on a new belt, but at high revs/load it jumps off...

Any ideas why this is happening?
Top
 Profile  
 
 
Posted: Sun Sep 18, 2005 1:24 pm 
Getting Side Ways
Offline
User avatar

Age: 33

Posts: 3277

Joined: 5th Nov 2004

Gallery: 36 images

Ride: Ronald Mcdonald Mobile

Location: Sydney
NSW, Australia

this was happening to mine.
i changed the idler pulley and it fixed it
i think they are 30 bux or so from fraud

 

_________________

Gooooone - Eb2 Coon - 143RWKW
Now - Mazda MX5 with HKS Supercharger 190RWKW
Crescent Motorsport Liverpool - 9600 6229

Top
 Profile  
 
 
Posted: Sun Sep 18, 2005 1:27 pm 
Getting Side Ways
Offline
User avatar

Posts: 1960

Joined: 6th Nov 2004

Gallery: 22 images

Power: 315 rwkw

Location: Under the flight path of incoming packpackers
NSW, Australia

Ah cool, I'll try a new one.

thanks mate
Top
 Profile  
 
 
Posted: Sun Sep 18, 2005 1:46 pm 
Getting Side Ways
Offline
User avatar

Age: 33

Posts: 3277

Joined: 5th Nov 2004

Gallery: 36 images

Ride: Ronald Mcdonald Mobile

Location: Sydney
NSW, Australia

no worries
the bearings were shot in my idler pulley so there was a bit of movement side to side on the pulley.

 

_________________

Gooooone - Eb2 Coon - 143RWKW
Now - Mazda MX5 with HKS Supercharger 190RWKW
Crescent Motorsport Liverpool - 9600 6229

Top
 Profile  
 
 
Posted: Sun Sep 18, 2005 6:00 pm 
Parts Gopher
Offline
User avatar

Age: 36

Posts: 89

Joined: 2nd Feb 2005

Gallery: 6 images

Location: st clair
NSW, Australia

mine did the same years back, got a belt the next size smaller.
had to leaver it on the pully it was so small.
hense it never came off again.

 

_________________

777rwkws on 39psi with an old eb sohc, going for 7s...........

Top
 Profile  
 
 
Posted: Sun Sep 18, 2005 7:19 pm 
Getting Side Ways
Offline
User avatar

Age: 33

Posts: 5924

Joined: 5th Nov 2004

Gallery: 7 images

Ride: Ford FPV FG F6 310

Power: 149 rwkw

Location: Brisbane
QLD, Australia

my ed did this.
the belt was worn more on one side.
i replaced it and it's never fallen off since.
the other thing to take note of if the belt is sitting perfectly straight.

 

_________________

NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter!

R.I.P. BF XR6 Turbo - You will not be forgotten :( 12.06@120MPH

Top
 Profile  
 
 
Posted: Sun Sep 18, 2005 8:00 pm 
Parts Gopher
Offline

Posts: 59

Joined: 14th Jun 2005

Ride: EB

Location: sydney
NSW, Australia

I would check the belt hasnt stretched or the idler bearing worn...
Top
 Profile  
 
 
Posted: Sun Sep 18, 2005 8:17 pm 
Getting Side Ways
Offline
User avatar

Posts: 1960

Joined: 6th Nov 2004

Gallery: 22 images

Power: 315 rwkw

Location: Under the flight path of incoming packpackers
NSW, Australia

Well, just put a new belt and pulley and it still came off... maybe it needs a new pulley on the pump?
Top
 Profile  
 
 
Posted: Sun Sep 18, 2005 11:52 pm 
Getting Side Ways
Offline
User avatar

Age: 43

Posts: 906

Joined: 9th Aug 2005

Gallery: 4 images

Ride: EB2

Location: s.e suburbs
VIC, Australia

maybe check the balancer could be worn with the extra power you got.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 9 posts ] 

Who is online

Users browsing this forum: No registered users and 40 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Dec 16, 2017 3:12 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names