Fordmods Logo

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

rear ressie 

 

Page 1 of 1 [ 11 posts ] 

Post New Topic Post Reply  Previous topic Next topic
 
daboonka
 Post subject: rear ressie
Posted: Sun May 02, 2010 5:22 pm 
Parts Gopher
Offline

Age: 34

Posts: 75

Joined: 15th Mar 2009

Ride: 98 EL Falcon

Location: Melbourne
VIC, Australia
hey all
happened to be under the car the other day and noticed that the read ressie was all rusted out. light tap with the hammer and it fell off. wanted to get that tail pipe off but where it joins the mid pipe but its stuck in. any tips on how to get it off without cutting it? tried hitting the join with a hammer but no success.
Top
 Profile  
 
 
alfy
 Post subject: Re: rear ressie
Posted: Sun May 02, 2010 5:28 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 5881

Joined: 2nd Mar 2006

Gallery: 5 images

Ride: 2021 Amarok V6

Location: Port Lincoln
SA, Australia
do you mean one pipe is stuck in the other? i soaked mine in Lanolin, then had one person holding the centre muffler while i attempted to twist the other end, it came unstuck after a while but was a lot of screwing around.

heat works too :D

 

_________________

2021 V6 Manual Amarok - 245kw/750nm - many goodies
1997 EL Fairmont Ghia 4.0 - Heritage Green & Cappa
2010 Suzuki GSX650F - when I want to be silly
Top
 Profile  
 
 
jonathon
 Post subject: Re: rear ressie
Posted: Sun May 02, 2010 5:34 pm 
SA Cruise Moderator
Offline
User avatar

Age: 37

Posts: 1870

Joined: 14th Apr 2006

Ride: 1993 EBll xr6, 2003 ba xt

Power: 150 rwkw

Location: Whyalla
SA, Australia
so does a angle grinder

 

_________________

Owning 1 of 84,847 ebII.
2x clarion subs 1200w, 1x clarion amp 400w, pioneer headunit, 16x8 roh reflex.
Clear side, front indicators, White dials, trip computer, boot spoiler, K & N air filter.
35% tint, paint code (z) stark white, 3" crome nudge bar, Xh snorkle
Top
 Profile  
 
 
alfy
 Post subject: Re: rear ressie
Posted: Sun May 02, 2010 5:58 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 5881

Joined: 2nd Mar 2006

Gallery: 5 images

Ride: 2021 Amarok V6

Location: Port Lincoln
SA, Australia
he did say no cutting lol

 

_________________

2021 V6 Manual Amarok - 245kw/750nm - many goodies
1997 EL Fairmont Ghia 4.0 - Heritage Green & Cappa
2010 Suzuki GSX650F - when I want to be silly
Top
 Profile  
 
 
jonathon
 Post subject: Re: rear ressie
Posted: Sun May 02, 2010 7:21 pm 
SA Cruise Moderator
Offline
User avatar

Age: 37

Posts: 1870

Joined: 14th Apr 2006

Ride: 1993 EBll xr6, 2003 ba xt

Power: 150 rwkw

Location: Whyalla
SA, Australia
whoops :P

um you could always try crc or wd40 and let it soak in for a while and try to pull apart.

 

_________________

Owning 1 of 84,847 ebII.
2x clarion subs 1200w, 1x clarion amp 400w, pioneer headunit, 16x8 roh reflex.
Clear side, front indicators, White dials, trip computer, boot spoiler, K & N air filter.
35% tint, paint code (z) stark white, 3" crome nudge bar, Xh snorkle
Top
 Profile  
 
 
89.SVO
 Post subject: Re: rear ressie
Posted: Sun May 02, 2010 7:23 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 3379

Joined: 11th Mar 2008

Ride: EA SVO, AU2, Toyota Crown

Location: Bendigo
VIC, Australia
heat it up with an oxy. may be the only way to do it

 

_________________

Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw.
Weekend car: AU2 "XR8" 220kw 5L 5 speed. 19" BBS LM . Full exhaust. Lowered on Kings and Koni's. 13.8@97mph
Fast car: EA SVO AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. approx 425rwkw. 10.8@126mph
Top
 Profile  
 
 
Troy
 Post subject: Re: rear ressie
Posted: Sun May 02, 2010 7:27 pm 
Getting Side Ways
Offline

Age: 40

Posts: 1046

Joined: 31st Mar 2005

Gallery: 2 images

Ride: ef falcon, el fairmont ghia

Location: Christchurch
New Zealand
heat it up, i just cut mine off to much f**k around
Top
 Profile  
 
 
fal98con
 Post subject: Re: rear ressie
Posted: Sun May 02, 2010 8:26 pm 
Stock as a Rock
Offline
User avatar

Age: 32

Posts: 164

Joined: 1st Jan 2010

Ride: EF manual Monty

Location: canberra
ACT, Australia
Get a chissel or something and try and pry apart the piping from each other if that makes sense?

But yeah just cut the f**k, for what its worth its too much stuffing around.

 

_________________

R.I.P My red beast :(
Top
 Profile  
 
 
fal98con
 Post subject: Re: rear ressie
Posted: Sun May 02, 2010 8:27 pm 
Stock as a Rock
Offline
User avatar

Age: 32

Posts: 164

Joined: 1st Jan 2010

Ride: EF manual Monty

Location: canberra
ACT, Australia
Sorry double post

 

_________________

R.I.P My red beast :(
Top
 Profile  
 
 
daboonka
 Post subject: Re: rear ressie
Posted: Mon May 03, 2010 12:05 am 
Parts Gopher
Offline

Age: 34

Posts: 75

Joined: 15th Mar 2009

Ride: 98 EL Falcon

Location: Melbourne
VIC, Australia
thanks guys for the input. was just checking to see if there was any easy way to do it without cutting. sounds like cuttings my best friend now. tried the crc and wd40. didn't work well. i recn if i can get it on a hoist i can get it off easy. 2 bad hoists dont grow on trees.
Top
 Profile  
 
 
daboonka
 Post subject: Re: rear ressie
Posted: Mon May 03, 2010 1:48 pm 
Parts Gopher
Offline

Age: 34

Posts: 75

Joined: 15th Mar 2009

Ride: 98 EL Falcon

Location: Melbourne
VIC, Australia
actually might give the heat gun a shot first.
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 1 of 1  [ 11 posts ] 
Jump to:  

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Who is online

Users browsing this forum: No registered users and 73 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Apr 26, 2024 3:50 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names