Fordmods Logo

Fordmods Advertising

removing the clutch fan 


Page 1 of 1 [ 5 posts ] 

 Post subject: removing the clutch fan
Posted: Thu Feb 01, 2007 9:03 am 
Stock as a Rock

Posts: 150

Joined: 30th Mar 2005

Location: geelong
VIC, Australia

i have an ed and am removing the motor and need to take the fan off. the manual says i need a special tool, is there any oher way of doing it?
Posted: Thu Feb 01, 2007 9:13 am 
Smokin em up

Age: 28

Posts: 277

Joined: 26th Aug 2006

Location: The Basin, Melbourne
VIC, Australia

I got a large flathead (like a long neck one, massive handle etc) and wedged that behind one of the nuts that are on the fan to hold it in place then used a spanner to get the nut off, not forgetting that it's reverse thread.

Although it's hard to explain without showing you, I found it easiest to lean as far in to the car as possible (on the left side), wedge the flathead down there on the fan and start to undo the nut from the far left - don't know why it was easier, meh.

Good luck!
Posted: Thu Feb 01, 2007 9:30 am 
Fordmods Junkie
User avatar

Age: 37

Posts: 5051

Joined: 5th Nov 2004

Ride: Kia Rio - 1.4L Auto

Power: 238 rwkw

Location: Westside
VIC, Australia

1. Take the front belt off the balancer.

2. Get a 10mm short angled spanner and put the ring end on a pulley bolt.

3. Turn the hub clockwise until the spanner jams on the pulley and balancer locking it from moving.

4. Get some multi grips, larger spanner or shifter and turn the fan nut clockwise. It should unbolt easily.
Posted: Thu Feb 01, 2007 5:48 pm 
Smokin em up
User avatar

Age: 30

Posts: 264

Joined: 5th Jan 2007

Ride: E-Hybrid Falcon

Location: nowra, nsw
NSW, Australia

yer theres a few FSST's (Ford Special Service Tool)in the book, thanks henry !



crow cam,cai,exaust,bbm,190 reg & el injectors,xr6 interior,guages,white cluster,pioneer/mtx stereo,big boot install w.i.p, 17"rims,koni/pedders shocks&springs with nolathane re-bush,ssv kit,stainless inserts,clear lights,t5 & short shifter,chardonay/pearl paint

Posted: Thu Feb 01, 2007 6:04 pm 
Getting Side Ways
User avatar

Age: 27

Posts: 4305

Joined: 6th Jul 2005

Ride: BA xr8 Magnet ute

Location: Melbourne
VIC, Australia

just remember its an opposite thread
Display posts from previous:
Sort by  
 Page 1 of 1  [ 5 posts ] 

Who is online

Users browsing this forum: EDCoonsta and 25 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum



It is currently Fri Oct 28, 2016 9:54 am All times are UTC + 11 hours



(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names