|
| ryan_meyer |
|
||
|
hey guys how much do i have to off the rocker gear to negate the use of shims or minimal shims cheers guys putting new cam in this week
|
||
| Top | |
||
| stockstandard |
|
|||
|
how much is being ground off the base circle?
_________________ Stoke me a clipper, I'll be back for Christmas |
|||
| Top | |
|||
| noclafdrof |
|
|||
|
wont this make the timing chain lose.
_________________ 05 XR6T shockwave prem sound t56 k&n 2cai center muffler mod / 95 ef Fairmont ghia stock. |
|||
| Top | |
|||
| WagonDad |
|
|||
|
The cam runs on the head not the rocker gear so the timing chain wont be affected. As stockstandard asked it all has to do with the base circle diameter, what ever measurment the base circle is reduced from standard you need to halve this and thats the amount to be removed from the bottom of the rocker gear, as an example if the standard base circle is 43mm and the reground base circle is 41mm the amount to be removed from the rocker gear will be 1mm. I havent done this myself but have done a lot of research and understand this to be correct.
_________________ 4.0L EF Fairmont Station Wagon. EL GT Snorkel. K&N Pod in air box. 3" Intake piping.
|
|||
| Top | |
|||
| ryan_meyer |
|
||
|
sorry guys i'll check with my cam grinder custom grind thats all
|
||
| Top | |
||
| flyingnunrt |
|
||
|
WagonDad wrote: The cam runs on the head not the rocker gear so the timing chain wont be affected. As stockstandard asked it all has to do with the base circle diameter, what ever measurment the base circle is reduced from standard you need to halve this and thats the amount to be removed from the bottom of the rocker gear, as an example if the standard base circle is 43mm and the reground base circle is 41mm the amount to be removed from the rocker gear will be 1mm. I havent done this myself but have done a lot of research and understand this to be correct.
0.667mm if rocker ratio is 2:1 ??
_________________ As Sigfried once said "Nein Nein Ninty Nine" |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 55 guests |
