Fordmods Logo

RWKW & KW expected? ba xr6 

 

Page 1 of 1 [ 13 posts ] 

 
 Post subject: RWKW & KW expected? ba xr6
Posted: Mon Dec 31, 2012 5:44 pm 
Stock as a Rock
Offline

Age: 26

Posts: 167

Joined: 21st Feb 2012

Ride: 2004 Ba Xr6

Location: Melbourne
VIC, Australia

Hey im just curious as to what RWKW & KWs im expected to be at once i have done my mods..

At the moment its 2004 ba xr6 4 speed auto

Mods are:

Pacemaker 4490 Extractors
Highflow venom cat 100cpsi
BMC Flat air filter
Typhoon airbox behind the headlight
XR6 Turbo snorkel instead of the standard
No sports exhaust because i got EPA and cbf with cops.
--------------------------------------------------------------
Future mod in about 15weeks time is..
Underdrive pulleys installed
Flash tune done at a shop
...............................................
Was told the flash tune would give around 15rwkw and ive read the underdrive pulleys give about 8-15rwkw on posts i have seen. What RWKW and KW will i expect to have once i have added the underdrive pulleys and flash tune done? thanks.
Top
 Profile  
 
 
 Post subject: Re: RWKW & KW expected? ba xr6
Posted: Mon Dec 31, 2012 8:00 pm 
Stock as a Rock
Offline

Age: 28

Posts: 182

Joined: 9th Jan 2011

Gallery: 4 images

Ride: 2004 ba xr6 turbo

Location: sydney
NSW, Australia

150 - 170 rwkw.... depending on the tune

my car wen it was non turbo, with full exhaust and flash tune, not custom tune... pulled like 151 rwkw, from standard which was 139 rwkw
Top
 Profile  
 
 
 Post subject: Re: RWKW & KW expected? ba xr6
Posted: Tue Jan 01, 2013 7:44 am 
Getting Side Ways
Offline

Age: 26

Posts: 789

Joined: 9th Dec 2011

Ride: S1 eb 5speed

Location: Coffs Harbour
NSW, Australia

Depends on the motor condition aswell
Top
 Profile  
 
 
 Post subject: Re: RWKW & KW expected? ba xr6
Posted: Tue Jan 01, 2013 11:02 am 
Getting Side Ways
Offline

Age: 29

Posts: 4182

Joined: 30th May 2005

Ride: 1993 EB XR8

Location: BrisVegas
QLD, Australia

It's like asking how long is a piece of string. There are far too many variables.

 

_________________

ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam.

51TER - DL LTD. Stock.

Top
 Profile  
 
 
 Post subject: Re: RWKW & KW expected? ba xr6
Posted: Tue Jan 01, 2013 11:49 am 
Getting Side Ways
Offline

Age: 29

Posts: 2563

Joined: 19th Feb 2007

Gallery: 21 images

Ride: 98 EL Futura

Power: 199 rwkw

Location: Lilydale
VIC, Australia

It won't pull any good numbers with a standard exhaust.

 

_________________

EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come

Top
 Profile  
 
 
 Post subject: Re: RWKW & KW expected? ba xr6
Posted: Tue Jan 01, 2013 1:23 pm 
Stock as a Rock
Offline

Age: 26

Posts: 167

Joined: 21st Feb 2012

Ride: 2004 Ba Xr6

Location: Melbourne
VIC, Australia

Pakrat wrote:
Depends on the motor condition aswell


motors in mint condition only 160,000 on the clock & always serviced on 5,000-8,000k's. dream car to drive doesnt get thrashed..atm it pulls from zf 6 speeds & bf's
Top
 Profile  
 
 
 Post subject: Re: RWKW & KW expected? ba xr6
Posted: Tue Jan 01, 2013 1:27 pm 
Stock as a Rock
Offline

Age: 26

Posts: 167

Joined: 21st Feb 2012

Ride: 2004 Ba Xr6

Location: Melbourne
VIC, Australia

GeZza200 wrote:
It won't pull any good numbers with a standard exhaust.


got a redback 2'5 with 1 muffler sitting in the shed from when i got EPA by the cops.. could always put it back on with the stock exhaust tip and make it quiet as a mouse with a resinator..Less excuse for cops to pull me up & still got the power behind me..

Didnt even really notice much difference when i took the exhaust off cause the EPA.. gunna cost 180$ to put a resinator on cause i had it originally designed to be really quiet untill i opened it up but after put high flow cat onto it the exhaust note went to atleast 120Db without testing (EPA Shop).. so gunna cost a bit, might even just sell the exhaust for 280-300$ with the twin dump tips and buy a new one save some money.
Top
 Profile  
 
 
 Post subject: Re: RWKW & KW expected? ba xr6
Posted: Tue Jan 01, 2013 3:01 pm 
Getting Side Ways
Offline
User avatar

Age: 28

Posts: 5889

Joined: 2nd Mar 2006

Gallery: 5 images

Ride: '14 Grand Cherokee

Location: Port Lincoln
SA, Australia

AussieXR6Grunt wrote:
GeZza200 wrote:
It won't pull any good numbers with a standard exhaust.


got a redback 2'5 with 1 muffler sitting in the shed from when i got EPA by the cops.. could always put it back on with the stock exhaust tip and make it quiet as a mouse with a resinator..Less excuse for cops to pull me up & still got the power behind me..

Didnt even really notice much difference when i took the exhaust off cause the EPA.. gunna cost 180$ to put a resinator on cause i had it originally designed to be really quiet untill i opened it up but after put high flow cat onto it the exhaust note went to atleast 120Db without testing (EPA Shop).. so gunna cost a bit, might even just sell the exhaust for 280-300$ with the twin dump tips and buy a new one save some money.


Did you have the tailpipe custom made?

Ive been searching everywhere for one with no muffler, my BA has 2 and its way too quiet for me.

 

_________________

11/93 ED OPT20 GLi | Full Boat Spec

Top
 Profile  
 
 
 Post subject: Re: RWKW & KW expected? ba xr6
Posted: Tue Jan 01, 2013 3:05 pm 
Stock as a Rock
Offline

Age: 26

Posts: 167

Joined: 21st Feb 2012

Ride: 2004 Ba Xr6

Location: Melbourne
VIC, Australia

alfy wrote:
AussieXR6Grunt wrote:
GeZza200 wrote:
It won't pull any good numbers with a standard exhaust.


got a redback 2'5 with 1 muffler sitting in the shed from when i got EPA by the cops.. could always put it back on with the stock exhaust tip and make it quiet as a mouse with a resinator..Less excuse for cops to pull me up & still got the power behind me..

Didnt even really notice much difference when i took the exhaust off cause the EPA.. gunna cost 180$ to put a resinator on cause i had it originally designed to be really quiet untill i opened it up but after put high flow cat onto it the exhaust note went to atleast 120Db without testing (EPA Shop).. so gunna cost a bit, might even just sell the exhaust for 280-300$ with the twin dump tips and buy a new one save some money.


Did you have the tailpipe custom made?

Ive been searching everywhere for one with no muffler, my BA has 2 and its way too quiet for me.
Just a redback 2'5 exhaust with 1 muffler and the resinator cut out im not too sure if he modified it anyway but i did ask him to make it so its quiet when cruising but the instant the flat foot it the exhaust would rip open a loud roaring crackle.. sounded great i even had 3 cars stop at the lights and talk to me about my car lol thats how good it sounded.. but yer just ask a shop to make it 1 muffler and no resinator im sure they'll do it and ull have a really nice loud note when u open it up.
Top
 Profile  
 
 
 Post subject: Re: RWKW & KW expected? ba xr6
Posted: Tue Jan 01, 2013 7:08 pm 
Getting Side Ways
Offline
User avatar

Age: 28

Posts: 5889

Joined: 2nd Mar 2006

Gallery: 5 images

Ride: '14 Grand Cherokee

Location: Port Lincoln
SA, Australia

sounds like a plan to me! cheers for the info.

 

_________________

11/93 ED OPT20 GLi | Full Boat Spec

Top
 Profile  
 
 
 Post subject: Re: RWKW & KW expected? ba xr6
Posted: Tue Jan 01, 2013 7:30 pm 
Stock as a Rock
Offline

Age: 26

Posts: 167

Joined: 21st Feb 2012

Ride: 2004 Ba Xr6

Location: Melbourne
VIC, Australia

alfy wrote:
sounds like a plan to me! cheers for the info.

no worries alfy :) best of luck mate 8-)
Top
 Profile  
 
 
 Post subject: Re: RWKW & KW expected? ba xr6
Posted: Wed Jan 02, 2013 12:48 pm 
Oompa Loompa
Offline
User avatar

Age: 47

Posts: 27

Joined: 27th Feb 2007

Gallery: 1 images

Ride: 13.41 @ 102mph

Location: Gold Coast
QLD, Australia

At the end of the day it's just a number... if you are going to tune it then stay with the same shop/dyno so you can acurately compare the numbers and good luck with it ..

I have seen a std BF auto run 152rwkws

I have seen a std BA auto run 139rwkws

I have read a BF made 182rwkws without extractors...
but it ran a 14.4 after fitting 4495's dunno the new powahh reading...

But mine only has 190rwkws on the last dyno pull (Dec)and i run 13.4 so yer its just numbers at the end of the day.

Manuals make a little more BIGGER stalled cars like mine make a lot less...

 

_________________

i am a banned wanker!

Top
 Profile  
 
 
 Post subject: Re: RWKW & KW expected? ba xr6
Posted: Wed Jan 02, 2013 6:08 pm 
Stock as a Rock
Offline

Age: 26

Posts: 167

Joined: 21st Feb 2012

Ride: 2004 Ba Xr6

Location: Melbourne
VIC, Australia

dazzler351 wrote:
At the end of the day it's just a number... if you are going to tune it then stay with the same shop/dyno so you can acurately compare the numbers and good luck with it ..

I have seen a std BF auto run 152rwkws

I have seen a std BA auto run 139rwkws

I have read a BF made 182rwkws without extractors...
but it ran a 14.4 after fitting 4495's dunno the new powahh reading...

But mine only has 190rwkws on the last dyno pull (Dec)and i run 13.4 so yer its just numbers at the end of the day.

Manuals make a little more BIGGER stalled cars like mine make a lot less...

Yeah thats true..ill only take it once down the quater mile if that just to get a idea of how it goes once its got these two last little things done. Mainly want the power there just so it is there if i ever need it one day & also i cannot stand driving a stock vehicle ..tried that for 7months and went insane lol, in other words i just like power :lol:
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 13 posts ] 

Who is online

Users browsing this forum: Google Adsense [Bot] and 33 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Dec 19, 2017 12:33 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names