Fordmods Logo

sump gasket and oil pump 

 

Page 1 of 1 [ 8 posts ] 

 
 Post subject: sump gasket and oil pump
Posted: Sat Jan 24, 2009 8:25 pm 
Stock as a Rock
Offline

Posts: 107

Joined: 16th Nov 2005

Location: whyalla
SA, Australia

does anyone know what model the falcon 4ltr one piece sump gaskets come out in, i was told its the genuine au sump gasket but the one the shop showed me looked like a rocker cover gasket, its like hard plastic type sump gasket not a cork one, im after one but know one in town, knows about them, also would a high volume oil pump be ok for turbo motor.
Top
 Profile  
 
 
 Post subject: Re: sump gasket and oil pump
Posted: Sun Jan 25, 2009 8:38 am 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

it wont be a cork gasket, be like the rocker cover :)
been yrs since i seen a cork gasket

as for the oil pump no idea!

 

_________________

RIP SCOTT

Top
 Profile  
 
 
 Post subject: Re: sump gasket and oil pump
Posted: Sun Jan 25, 2009 9:25 am 
Stock as a Rock
Offline

Posts: 107

Joined: 16th Nov 2005

Location: whyalla
SA, Australia

yer just all the sump gaskets they had here were, ether a cork one or a real thin rubber rocker gasket type, the one i was after is a black wide thick plastic type, cheers anyway.
Top
 Profile  
 
 
 Post subject: Re: sump gasket and oil pump
Posted: Sun Jan 25, 2009 9:27 am 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 1967

Joined: 13th Aug 2005

Ride: 2000 Au wagon

Location: some where in nsw
NSW, Australia

i know what one piece gasket you on about,they are few and far between,better option but not many people use them so they are not normaly a stocked item.

as for the pump,i spose it can't hurt having a higher flow rate.

 

_________________

Image

Top
 Profile  
 
 
 Post subject: Re: sump gasket and oil pump
Posted: Sun Jan 25, 2009 9:46 am 
Getting Side Ways
Offline

Posts: 2464

Joined: 5th Nov 2004

Gallery: 7 images

Location: Brisbane
QLD, Australia

Carefull with the high volume option. This is a known cause of rooting the dizzy drive gear. The high volume pumps increase the load on the drive gear from the idler shaft, and you may destroy both the shaft and the drive gear.

Done that once. I suspect its also the cause of other people here having similar issues.

Nigel
Top
 Profile  
 
 
 Post subject: Re: sump gasket and oil pump
Posted: Sun Jan 25, 2009 9:01 pm 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

mm so it be fine on a ef/au then

as they run coil packs :)

 

_________________

RIP SCOTT

Top
 Profile  
 
 
 Post subject: Re: sump gasket and oil pump
Posted: Sun Jan 25, 2009 10:18 pm 
Fordmods Junkie
Offline
User avatar

Age: 44

Posts: 5051

Joined: 5th Nov 2004

Ride: Kia Rio - 1.4L Auto

Power: 238 rwkw

Location: Westside
VIC, Australia

boosted22 wrote:
does anyone know what model the falcon 4ltr one piece sump gaskets come out in, i was told its the genuine au sump gasket but the one the shop showed me looked like a rocker cover gasket, its like hard plastic type sump gasket not a cork one, im after one but know one in town, knows about them, also would a high volume oil pump be ok for turbo motor.


They are an EF/EL part only, and only available genuine. And its metal cased in a rubber outer, apart from the 1/2 moons which are all rubber.
Top
 Profile  
 
 
 Post subject: Re: sump gasket and oil pump
Posted: Sun Jan 25, 2009 11:15 pm 
Stock as a Rock
Offline

Posts: 107

Joined: 16th Nov 2005

Location: whyalla
SA, Australia

ok thanks il give a ford dealer in adelaide a ring and see, be easier than trying to get one my local shops to get it in.

arm79 wrote:
boosted22 wrote:
does anyone know what model the falcon 4ltr one piece sump gaskets come out in, i was told its the genuine au sump gasket but the one the shop showed me looked like a rocker cover gasket, its like hard plastic type sump gasket not a cork one, im after one but know one in town, knows about them, also would a high volume oil pump be ok for turbo motor.


They are an EF/EL part only, and only available genuine. And its metal cased in a rubber outer, apart from the 1/2 moons which are all rubber.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 8 posts ] 

Who is online

Users browsing this forum: Google [Bot] and 60 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Apr 20, 2024 2:39 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names