|
| 93EB |
|
|||
Age: 46 Posts: 2484 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
I am having a guess but..... Is it possible your fuel reg is faulty and your car is over fuel ing.?
May be worth changing from the other EF if you have a spare 15 mins and see how it goes.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| SWC |
|
||
|
Air Temp Sensor on the BBM?
|
||
| Top | |
||
| bradley4567 |
|
||
|
93EB wrote: I am having a guess but..... Is it possible your fuel reg is faulty and your car is over fuel ing.? May be worth changing from the other EF if you have a spare 15 mins and see how it goes. yer i could change it, can you tell me where it is?
_________________ ef falcon daily driver |
||
| Top | |
||
| bradley4567 |
|
||
|
SWC wrote: Air Temp Sensor on the BBM? ok ill change that too could you tell me where it is?
_________________ ef falcon daily driver |
||
| Top | |
||
| TROYMAN |
|
||
|
actually i just realised that white smoke your talking about is more likely oil smoke..
remember when we went to wollongong and i said your car blows a lot of smoke.. it smelt a bit like a cross between burning oil and diesel... |
||
| Top | |
||
| 93EB |
|
|||
Age: 46 Posts: 2484 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
OK then if Troy said its an oil smell change with a thicker oil.
If you wanna try the fuel reg, if its the same as my EB its on the passenger side towards the firewall just above the fuel rail end. Has a small black vacume pipe in the top of it and a thicker fuel line under neath it.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| bradley4567 |
|
||
|
uniacidz wrote: Oxygen sensor? umm the one on the extractors? would getting it soaked in water kinda damage it, aka previous head gasket gone?
_________________ ef falcon daily driver |
||
| Top | |
||
| bradley4567 |
|
||
|
uniacidz wrote: Yep Coolant kills it. If any is on it, wont function right. Water isnt its friend either. thanks for the advise, i'll change it tomorrow morning first as it the easiest and i have a couple good ones laying around then move onto changing the other item that everyone else suggested. Thanks for your help guys i'll let you know how i go
_________________ ef falcon daily driver |
||
| Top | |
||
| bradley4567 |
|
||
|
uniacidz wrote: check my edited post alright will do. hopefully not rings, means head off again, pretty much engine out of car SWC you out there, if you still have that block you were showing me i'd be very keen to purchase it from you as we discussed before build it up while current motor withers away to nothing. Thanks Brad
_________________ ef falcon daily driver |
||
| Top | |
||
| SWC |
|
||
|
yes still have block & pistons
|
||
| Top | |
||
| Campbell18 |
|
|||
|
g'day guys, im having the exact same symptoms, except mine only started just after i installed a wade 1636
car is fine to drive, but on a cold startup it spits black stuff out the exhaust and leaves a pretty oily smell behind afterwards iv checked all the vacuum hoses and the MAP sensor and everything seems to be ok is this just the cam?? cheers
_________________ ED 4.0L auto... pacemaker PH4480, Aus Pac Catback exhaust, wade 1636 with j3 tune =130rwkw |
|||
| Top | |
|||
| bradley4567 |
|
||
|
When I did the head I put in an xr6 cam that wouldn't cause this though would it?
_________________ ef falcon daily driver |
||
| Top | |
||
| TROYMAN |
|
||
|
bradley4567 wrote: When I did the head I put in an xr6 cam that wouldn't cause this though would it? nope the xr6 cam would cause that kind of proplem.. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 53 guests |
