Fordmods Logo

Training AU3 XR6 Keypads 

 

Page 1 of 1 [ 12 posts ] 

 
 Post subject: Training AU3 XR6 Keypads
Posted: Mon Jan 18, 2010 7:12 pm 
Oompa Loompa
Offline

Age: 30

Posts: 24

Joined: 19th Aug 2009

Gallery: 1 images

Ride: AU III XR6 HP

Location: Melbourne
VIC, Australia

Jus got another keypad (Smartshield) for my AU3. Have ran thru the instructions 50,000 times Key in I position demister 3 times in 5 seconds ra ra ra...nothing!!! The doors are not cycling nothing. Any ideas. Could something be wrong with my car. Everything works fine although recently my interior lights wouldnt turn off. Close the door lock it and they stay on. So Iv just takin the bulbs out. Could this have something to do withit??? HELP.
Top
 Profile  
 
 
 Post subject: Re: Training AU3 XR6 Keypads
Posted: Mon Jan 18, 2010 9:20 pm 
Oompa Loompa
Offline

Age: 30

Posts: 24

Joined: 19th Aug 2009

Gallery: 1 images

Ride: AU III XR6 HP

Location: Melbourne
VIC, Australia

Someone??? Anyone??
Top
 Profile  
 
 
 Post subject: Re: Training AU3 XR6 Keypads
Posted: Mon Jan 18, 2010 10:42 pm 
Getting Side Ways
Offline
User avatar

Age: 29

Posts: 2159

Joined: 15th Nov 2005

Gallery: 17 images

Ride: TS40

Location: Latrobe Valley
VIC, Australia

jakzun wrote:
Jus got another keypad (Smartshield) for my AU3. Have ran thru the instructions 50,000 times Key in I position demister 3 times in 5 seconds ra ra ra...nothing!!! The doors are not cycling nothing. Any ideas. Could something be wrong with my car. Everything works fine although recently my interior lights wouldnt turn off. Close the door lock it and they stay on. So Iv just takin the bulbs out. Could this have something to do withit??? HELP.

flick your dash lights to low (the switch next to the headlight switch) and check if you interior lights turn off, if they dont then one of you door switches might not be in right...

the doom light will turn on when a door is open and turn of after about 10 seconds when the doors closed unless the car is turn to "on" then the lights should turn off instantly...

sounds like your doing the right thing, just check against this doco
http://www.fordmods.com/documents.php?d=35

If the car is running and all the doors are closed are the interior lights on?

 

_________________

Was - 2001 AUIII Ford Falcon Forte
Genuine T2 TS50 bodykit, 18" BF Cobras, Boge and Eibach Suspension and Complete AU2 Fairmont Ghia Interior

Now - 2012 FG Mk2 Ford Falcon XR6
Swift Green,6 Speed Auto, Stock... and a Fuel Card :)

Top
 Profile  
 
 
 Post subject: Re: Training AU3 XR6 Keypads
Posted: Tue Jan 19, 2010 11:20 am 
Oompa Loompa
Offline

Age: 30

Posts: 24

Joined: 19th Aug 2009

Gallery: 1 images

Ride: AU III XR6 HP

Location: Melbourne
VIC, Australia

Yea mate stay on. Dont know jack s**t about electronics tho so havnt fiddled with anything. N my dim light is always put bak to low after use. Im more worried about this key training tho. Dont why I cant access the bem learn mode. Iv literally sat in my car for lyk 2 hours. Tried with radio on off .. Exactly 3 pushes in 5 seconds 3 quick pushes before 5 seconds is up. Im stumped the locks will not cycle lyk they are supposed too. But everything on my car is in good working order so it SHOULD work.
Top
 Profile  
 
 
 Post subject: Re: Training AU3 XR6 Keypads
Posted: Tue Jan 19, 2010 11:40 am 
Getting Side Ways
Offline
User avatar

Posts: 686

Joined: 11th Sep 2008

Location: Melbourne
VIC, Australia

try lock all your doors with the key. Go round and lift all the handles. If all doors stay locked then thats good. But some BEM'S had a problem of not going into learn mode. This may be the case here. Also check all your fuses are ok.
Top
 Profile  
 
 
 Post subject: Re: Training AU3 XR6 Keypads
Posted: Tue Jan 19, 2010 11:42 am 
Getting Side Ways
Offline
User avatar

Posts: 686

Joined: 11th Sep 2008

Location: Melbourne
VIC, Australia

also i assume your in the car with all doors closed when your trying this?
Top
 Profile  
 
 
 Post subject: Re: Training AU3 XR6 Keypads
Posted: Tue Jan 19, 2010 11:57 am 
Oompa Loompa
Offline

Age: 30

Posts: 24

Joined: 19th Aug 2009

Gallery: 1 images

Ride: AU III XR6 HP

Location: Melbourne
VIC, Australia

Course. Il look at the doors when my misses gets home from uni but Im sure they all work coz I only had a key she had the remote. Its why I got another. With the Bbem not going into learn mode wat would this mean? replacing it?? I wanted to put power windows in the rear till I found out that bems were different on different models (High Series , Mid, Low) so scrapped that. Ever replaced one??? How hard for a novice??
Top
 Profile  
 
 
 Post subject: Re: Training AU3 XR6 Keypads
Posted: Tue Jan 19, 2010 12:00 pm 
Oompa Loompa
Offline

Age: 30

Posts: 24

Joined: 19th Aug 2009

Gallery: 1 images

Ride: AU III XR6 HP

Location: Melbourne
VIC, Australia

Also anyone know how much?? Round about anyways??
Top
 Profile  
 
 
 Post subject: Re: Training AU3 XR6 Keypads
Posted: Tue Jan 19, 2010 2:13 pm 
Getting Side Ways
Offline
User avatar

Posts: 686

Joined: 11th Sep 2008

Location: Melbourne
VIC, Australia

bem is not hard to change. Any novice can do it. But youll need to programe the smart sheild. For that you need Ford's diagnostic. So you might be better going to a dealership and taking them a 2nd hand BEM which you can get from the wreckers. Im guessing a fair price to pay for one would be between $50 and $120?? But ive never bought a 2nd hand one so thats just a guess.

Reason i said to check all doors is they can look like they are locking, but if you lift the handle it unlocks the car sometimes. And which ever one does this is the faulty door lock. Very common.
Top
 Profile  
 
 
 Post subject: Re: Training AU3 XR6 Keypads
Posted: Tue Jan 19, 2010 8:10 pm 
Oompa Loompa
Offline

Age: 30

Posts: 24

Joined: 19th Aug 2009

Gallery: 1 images

Ride: AU III XR6 HP

Location: Melbourne
VIC, Australia

All doors are fine. Still not able to access learn mode. gonna take it to my mechanic. Ex ford foreman knows his s**t. Thanks for the input
Top
 Profile  
 
 
 Post subject: Re: Training AU3 XR6 Keypads
Posted: Tue Jan 19, 2010 9:12 pm 
Getting Side Ways
Offline
User avatar

Age: 29

Posts: 2159

Joined: 15th Nov 2005

Gallery: 17 images

Ride: TS40

Location: Latrobe Valley
VIC, Australia

is the globe above your ignition key hole blown? that can cause interior lights to stay on, id say the interior light is causing you keypad problem, not your bem

 

_________________

Was - 2001 AUIII Ford Falcon Forte
Genuine T2 TS50 bodykit, 18" BF Cobras, Boge and Eibach Suspension and Complete AU2 Fairmont Ghia Interior

Now - 2012 FG Mk2 Ford Falcon XR6
Swift Green,6 Speed Auto, Stock... and a Fuel Card :)

Top
 Profile  
 
 
 Post subject: Re: Training AU3 XR6 Keypads
Posted: Wed Jan 20, 2010 5:11 pm 
Oompa Loompa
Offline

Age: 30

Posts: 24

Joined: 19th Aug 2009

Gallery: 1 images

Ride: AU III XR6 HP

Location: Melbourne
VIC, Australia

Well I finally accessed learn mode. And all I did. . . . wait for it..... WASHED the bloody thing!! No s**t. Took it to the car wash this morning washed it got in tried the sequence bingo. Cars got a mind of its own. As for the interior lights, the globe above the ignition is fine so still dont know wats the go there.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 12 posts ] 

Who is online

Users browsing this forum: No registered users and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Dec 12, 2017 3:53 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names