|
| khanacross |
|
||
|
hi guys ,i have a 99 s2 au futura the problem is i only have 1 key, i want to add at least 1 more for the misses ,i red the tech artical on adding more keys but it said you need 2 programmed keys to add any more, so what can i do? is it possible to go to wreckers and buy a ignition barrel with 2 keys and 2 keypads and programme them to the car???thanks ken
|
||
| Top | |
||
| Slick |
|
|||
|
khanacross wrote: hi guys ,i have a 99 s2 au futura the problem is i only have 1 key, i want to add at least 1 more for the misses ,i red the tech artical on adding more keys but it said you need 2 programmed keys to add any more, so what can i do? is it possible to go to wreckers and buy a ignition barrel with 2 keys and 2 keypads and programme them to the car???thanks ken
Get 2 set of new keys, wipe the old key of the system then program the new one's. check your owners manual for instructions.
_________________ Mind f**k!!! it works on feeble minded ignorant sheeples... there's plenty of em on this site... some are very intelligent but by god they are so thick!!! Pakrat wrote: You can buy them seppertly
|
|||
| Top | |
|||
| khanacross |
|
||
|
thanks for reply, so are you saying i should get a complete ignition barrel with 2 keys and reprogramme them to the car????? because if i just get another key it wont fit my barrel, so i have to replace it and also the door lock .is that right ? thanks ken
|
||
| Top | |
||
| xr8 dismantler |
|
|||
|
you cant just change an ignition barrel it needs to be programed
best way is to get a new key cut , then take it to ford and get it programed. once you have 2 keys you can then program more |
|||
| Top | |
|||
| dddp! |
|
|||
|
khanacross wrote: , so are you saying i should get a complete ignition barrel with 2 keys and reprogramme them to the car????? far as i can tell he said Slick wrote: Get 2 set of new keys, wipe the old key of the system then program the new one's. check your owners manual for instructions.
|
|||
| Top | |
|||
| Slick |
|
|||
|
khanacross wrote: thanks for reply, so are you saying i should get a complete ignition barrel with 2 keys and reprogramme them to the car????? because if i just get another key it wont fit my barrel, so i have to replace it and also the door lock .is that right ? thanks ken
just 2 blank keys. either get it cut or from Ford. the shape of the key is like a bar code when converted to electronic form, once programmed in it only recognized that set of key code.
_________________ Mind f**k!!! it works on feeble minded ignorant sheeples... there's plenty of em on this site... some are very intelligent but by god they are so thick!!! Pakrat wrote: You can buy them seppertly
|
|||
| Top | |
|||
| dddp! |
|
|||
|
it make you wonder how effective these locks really are
i remember when tibbe locks first came out, big song and dance was made about how much car secruity had been increased blah blah blah ... unfortunately the bloke who broke into my car didn't listen to all that crap, he just stuck a screwdriver into the bigger tibbe lock hole and bent it until the lock unlocked itself then he opened the door normally, i think it would have taken him about 2 seconds max to get into the car 
what's the point of all this crap if it can be negated so easily |
|||
| Top | |
|||
| Slick |
|
|||
|
I can unlock my au ute with the family EF key but can't start it. I can also unlock the ef with the AU keys. go figure!
_________________ Mind f**k!!! it works on feeble minded ignorant sheeples... there's plenty of em on this site... some are very intelligent but by god they are so thick!!! Pakrat wrote: You can buy them seppertly
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 77 guests |
