Fordmods Logo

Typhoon exhaust system 

 

Page 1 of 1 [ 10 posts ] 

 
 Post subject: Typhoon exhaust system
Posted: Thu Aug 23, 2007 9:31 pm 
Fordmods Newbie
Offline

Age: 27

Posts: 4

Joined: 14th Aug 2007

Ride: BA XR6

Location: Perth
WA, Australia

Hi all, looking to put an exhaust system on my ba xr6.. and a mate of mine has a full stainless steel typhoon set up, from the extractors back to muffler. Anyone ever heard of this set up being put onto a standard xr6 if so how did it work out. Thanks.
Top
 Profile  
 
 
Posted: Thu Aug 23, 2007 9:36 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 576

Joined: 4th May 2007

Ride: BA

Location: Mighty Melbourne
VIC, Australia

dunno if it'd work dude... the typhoooooon is a turbo, I'm assuming your XR isn't. You'd actually lose power depending on the size of the system

 

_________________

mmmmmmmmmunchy!

Top
 Profile  
 
 
Posted: Thu Aug 23, 2007 9:45 pm 
Getting Side Ways
Offline

Age: 28

Posts: 554

Joined: 24th Mar 2007

Gallery: 2 images

Ride: ef 5 speed

Location: melbourne
VIC, Australia

normal f6 is like under 3 inch stock so dont go any bigger than 3 inch

 

_________________

i am in need of a new front bar or good condation secondhand for a 95 ef futra,
lsd for a for ef ,modifed au sump to go in and ef , working air con compressor

Top
 Profile  
 
 
Posted: Thu Aug 23, 2007 9:48 pm 
Fordmods Newbie
Offline

Age: 27

Posts: 4

Joined: 14th Aug 2007

Ride: BA XR6

Location: Perth
WA, Australia

Yeah it's just the stock f6 setup, i think its strait 2.5 inch
Top
 Profile  
 
 
Posted: Thu Aug 23, 2007 9:53 pm 
Getting Side Ways
Offline

Age: 28

Posts: 554

Joined: 24th Mar 2007

Gallery: 2 images

Ride: ef 5 speed

Location: melbourne
VIC, Australia

i dont know for shaw because the race car f6 i work on doesnt run a cat so if i was you i would be looking at a after maket exausht because ford dont really make a to good exausht if you get what i mean but if you can get it cheap go a head

 

_________________

i am in need of a new front bar or good condation secondhand for a 95 ef futra,
lsd for a for ef ,modifed au sump to go in and ef , working air con compressor

Top
 Profile  
 
 
Posted: Thu Aug 23, 2007 9:58 pm 
Getting Side Ways
Offline
User avatar

Posts: 1549

Joined: 27th Apr 2005

Gallery: 1 images

Ride: AU Fairmont Ghia

Location: Perth
WA, Australia

the stock F6 system is the same as the XR6T, twin 2.25" mandrel bent

It will perform well on a normal XT/ XR6

Don't pay over $200 for it though
Top
 Profile  
 
 
Posted: Thu Aug 23, 2007 10:22 pm 
Fordmods Newbie
Offline

Age: 27

Posts: 4

Joined: 14th Aug 2007

Ride: BA XR6

Location: Perth
WA, Australia

Thanks for the replys, anyone else have an opinion
Top
 Profile  
 
 
Posted: Thu Aug 23, 2007 11:50 pm 
Tyre Shredder
Offline

Posts: 330

Joined: 26th Apr 2006

Location: rockingham
WA, Australia

Alot of high end n/a BA/BFs (180-190rwkw) are running the xr6 turbo cat backs. If its cheap enough i would get it.
Top
 Profile  
 
 
Posted: Fri Aug 24, 2007 11:35 pm 
Tyre Shredder
Offline

Age: 29

Posts: 354

Joined: 27th Jun 2006

Gallery: 4 images

Ride: EL Fairmont Ghiaaaaa!

Location: Wesside, Melbourne
VIC, Australia

The cat itself is supposedly pretty good. i read a zoom article where the found the stock system minus the center muffler flowed almost exactly the same as an aftermarket 3inch :)

 

_________________

Image
Whiteline'd

Top
 Profile  
 
 
Posted: Sat Aug 25, 2007 7:49 pm 
Getting Side Ways
Offline

Age: 30

Posts: 1798

Joined: 14th Jun 2006

Gallery: 7 images

Ride: FG 50th Anni G6E Turbo

Location: Melbourne
VIC, Australia

Blu Falc wrote:
the stock F6 system is the same as the XR6T, twin 2.25" mandrel bent

It will perform well on a normal XT/ XR6

Don't pay over $200 for it though


Bought mine of ebay for $145 then put a hi-flow and extractors on.
Runs no problems at all :D
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 10 posts ] 

Who is online

Users browsing this forum: Google [Bot], Google Adsense [Bot] and 48 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 11, 2017 5:27 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names