|
| XGRUMPIG |
|
||
|
gday guys n gals first post here
well my XG died the other day drove her in to the drive way changed tyres now it wont start so far iv replaced the coil dizy dizy cap rotor buton n leads i have fuel at the rail and gas primes when set to gas good spark aswell now but she just wont kick over. i also have a smart lock override installed aswell. |
||
| Top | |
||
| bry40l |
|
|||
|
you didnt move the timing out while replacing anything?
_________________ BF XR6 |
|||
| Top | |
|||
| XGRUMPIG |
|
||
|
i did the dizy as if it was a new one followd the service manuel to a T
|
||
| Top | |
||
| 79 raven |
|
|||
|
So you made sure of tdc when replacing the dizzy? I gather you replaced the dizzy because it would not start prior right? What does it do? Does it try to start, does it make any noises when you turn the key?
|
|||
| Top | |
|||
| XGRUMPIG |
|
||
|
yeah tdc compression
had weak spark so i replaced coil then dizy now its got strong spark but wont start and no injector pulse |
||
| Top | |
||
| XGRUMPIG |
|
||
|
pulled dizy out again todAY re checkd timing thats all good put another tfi moduel on and put in a new smartlock over ride still no go wont fire as there is no injector pulse any ideas
|
||
| Top | |
||
| EL___Fairmont |
|
|||
|
XGRUMPIG wrote: pulled dizy out again todAY re checkd timing thats all good put another tfi moduel on and put in a new smartlock over ride still no go wont fire as there is no injector pulse any ideas Brown ECU relay controls power to the injectors next to the fuel pump relay. To me it sounds like a smart lock problem or wiring issue even though you have bypassed it. Your ctrl lmp fuse OK
_________________ Current ride 2007 |
|||
| Top | |
|||
| XGRUMPIG |
|
||
|
yep ctrl lamp fuse is all good
i put my code tester on there to check my smartlock and all that with a engin off test and it all passed ok.. gonna put new dizy in tommorow. |
||
| Top | |
||
| revcore |
|
|||
|
Put up some pics of "Daisy"....She's a damn nice B&S rig.
Hope the new dizzy gets the 'ol girl roaring into life once again mate.
_________________
|
|||
| Top | |
|||
| XGRUMPIG |
|
||
|
put new dizy in other day and another new coil
i now have spark fuel and injector pulse but still no go she just wont start. all problems began when my first dizy died. running outa ideas really dont wanna scrap her but she becoming a money pit thats not even running. |
||
| Top | |
||
| XGRUMPIG |
|
||
|
 
|
||
| Top | |
||
| XGRUMPIG |
|
||
|
update shes dead as
put new battery in as old one died pulled all plugs out n cleand them n re gaped then pop them back in n still no go but got good spark ( dad bought a spark tester) so wreckn her now n savn good bits for next ute. thanks every one |
||
| Top | |
||
| XGRUMPIG |
|
||
|
update
just couldnt give up on the old girl got her to fire up today with my foot flat to the floor timimng some how was/is miles out so iv moved the dizy again to try make her run properly cant test again till batterys charged but she lives |
||
| Top | |
||
| xf_man |
|
|||
Age: 45 Posts: 624 Joined: 21st Mar 2005 Ride: Triton ute BA Futura Location: Woori Yallock |
I aways thought in an XG you needed to arch out the pins on the ecu to put the dizzy into learn mode?
It gives you a certain amount of time to set the timing then the ECu will advance it ? |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 53 guests |
