Fordmods Logo

xr6 cam into stock engine 

 

Page 1 of 3 [ 34 posts ] Go to page 1, 2, 3  Next

 
 Post subject: xr6 cam into stock engine
Posted: Mon Mar 21, 2011 11:30 pm 
Getting Side Ways
Offline

Age: 34

Posts: 424

Joined: 18th Feb 2010

Ride: Ford EF - Garret TO4Z

Location: Hobart
TAS, Australia

ok basically EF engine,, crow cam springs aparentally xr6 equiv, can i put an ed xr6 cam into it? or will it cause problems???

 

_________________

Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue

Top
 Profile  
 
 
 Post subject: Re: xr6 cam into stock engine
Posted: Mon Mar 21, 2011 11:32 pm 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia

no problems it will work fine,..
Top
 Profile  
 
 
 Post subject: Re: xr6 cam into stock engine
Posted: Mon Mar 21, 2011 11:41 pm 
Getting Side Ways
Offline

Age: 34

Posts: 424

Joined: 18th Feb 2010

Ride: Ford EF - Garret TO4Z

Location: Hobart
TAS, Australia

also i know ive asked this before but is the xr6 ed cam better than ef? stock cam

 

_________________

Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue

Top
 Profile  
 
 
 Post subject: Re: xr6 cam into stock engine
Posted: Mon Mar 21, 2011 11:58 pm 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia

Shifteh wrote:
also i know ive asked this before but is the xr6 ed cam better than ef? stock cam


yes slightly better then std... the eb,ed xr6 cams are the same as ef and el xr6 cams..
Top
 Profile  
 
 
 Post subject: Re: xr6 cam into stock engine
Posted: Tue Mar 22, 2011 12:13 am 
Getting Side Ways
Offline

Age: 34

Posts: 424

Joined: 18th Feb 2010

Ride: Ford EF - Garret TO4Z

Location: Hobart
TAS, Australia

exawst note???

 

_________________

Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue

Top
 Profile  
 
 
 Post subject: Re: xr6 cam into stock engine
Posted: Tue Mar 22, 2011 12:16 am 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia

it will still sound like stock..
Top
 Profile  
 
 
 Post subject: Re: xr6 cam into stock engine
Posted: Tue Mar 22, 2011 2:17 pm 
Getting Side Ways
Offline

Age: 34

Posts: 424

Joined: 18th Feb 2010

Ride: Ford EF - Garret TO4Z

Location: Hobart
TAS, Australia

do i have to shim it at all?

 

_________________

Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue

Top
 Profile  
 
 
 Post subject: Re: xr6 cam into stock engine
Posted: Tue Mar 22, 2011 2:19 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia

Pre sure it will be same as if you were puttin the stock csm back in as it isnt a regrind

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto

Top
 Profile  
 
 
 Post subject: Re: xr6 cam into stock engine
Posted: Tue Mar 22, 2011 2:22 pm 
Getting Side Ways
Offline

Age: 34

Posts: 424

Joined: 18th Feb 2010

Ride: Ford EF - Garret TO4Z

Location: Hobart
TAS, Australia

cheers (runs out back with tickford cam :P

 

_________________

Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue

Top
 Profile  
 
 
 Post subject: Re: xr6 cam into stock engine
Posted: Tue Mar 22, 2011 2:33 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia

For 200 odd you couldve had a decent regrind which would make a big difference in performance as opposed to the tickford one

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto

Top
 Profile  
 
 
 Post subject: Re: xr6 cam into stock engine
Posted: Tue Mar 22, 2011 2:36 pm 
Getting Side Ways
Offline

Age: 34

Posts: 424

Joined: 18th Feb 2010

Ride: Ford EF - Garret TO4Z

Location: Hobart
TAS, Australia

this was a ed xr6 cam sitting around as opposed to the stock ef cam

 

_________________

Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue

Top
 Profile  
 
 
 Post subject: Re: xr6 cam into stock engine
Posted: Tue Mar 22, 2011 3:44 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia

Yea
Better throwin a freebie tickford 1 in than lettin it go to waste

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto

Top
 Profile  
 
 
 Post subject: Re: xr6 cam into stock engine
Posted: Tue Mar 22, 2011 4:07 pm 
Getting Side Ways
Offline

Age: 34

Posts: 424

Joined: 18th Feb 2010

Ride: Ford EF - Garret TO4Z

Location: Hobart
TAS, Australia

half way done, just having a coffie

 

_________________

Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue

Top
 Profile  
 
 
 Post subject: Re: xr6 cam into stock engine
Posted: Tue Mar 22, 2011 4:08 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia

Ill have a beer n smoke thanx lol

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto

Top
 Profile  
 
 
 Post subject: Re: xr6 cam into stock engine
Posted: Tue Mar 22, 2011 4:19 pm 
Getting Side Ways
Offline

Age: 34

Posts: 424

Joined: 18th Feb 2010

Ride: Ford EF - Garret TO4Z

Location: Hobart
TAS, Australia

i woulb be having a smoke if i was payed on tuesday :S,, anyway, i never work on my engine while drinking ><

 

_________________

Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 3  [ 34 posts ]  Go to page 1, 2, 3  Next

Who is online

Users browsing this forum: No registered users and 47 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Mar 29, 2024 11:56 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names